What Have You Done To Your 3rd Gen Today?

Was in Paso and drove through your town today. Rolling down Hwy 101.

 

I hope so, I took it to a shop coz I'm tired of working on it. Lol. I also replaced the water pump and the other top idler pulley about 5 months ago. So after the AC pulley gets done I'll pretty much have all new Pullies.

 

Paid off my wife's 2019 DCSB manual. 1 down, 2 to go. Still have my 2021 MGM DCSB and my son's 2021 AG DCSB.

 

Funny because when I dropped my truck off last night for leveling to be installed they did the thing where they check for scratches and came back and said "you got some nice pin stripes there" lol. Yeah I actually take it out to do truck things.

 

What are the specs on your lift, tire, and wheel combo. Your truck has an awesome stance.

 

Changed out the head unit knobs and did the AC drain hose extension mod.


Oh...and a little driveway flex. LOL

 

One of the trucks I traded in on a new one in the past, the salesmen said, “man it looks like you drive this thing in the woods”. I said that’s because I do! People expect these things to all be pavement princesses and mall crawlers.

 

Installed a VLED tail light kit since Total Tails were sold out. Half wonder if it’s not from the same manufacturer, heh.

 

Not done today but...Wednesday I added a Prinsu Roof Rack with handles and a 40 inch Heretic light bar. Yesterday it was the iKamper Skycamp Mini 3.0.
Trying to get the Doggo Paw Print of Approval but it might take a bit of time. Doesn't look too happy.
Next is a Taruca awning, suspension upgrade, brake upgrade, and front and rear bumpers

 

Thanks Brother !
It’s just a Ready-Lift 3” in the front and 2” in the back. 4WP UCA’s and 5100’s all the way around. Mickey Thompson Baja Boss 285 75 16 with Method 301’s “I think” can’t remember the offset and my receipts are some where lol have to dig for them for the offset.
Just the perfect amount of poke and rides nice and the Mickey Thompson really hook up in the dirt and are street friendly being pretty quiet also

 

Nice! Thanks for the reply. I currently have Fox 2.0's (around 1.2" up front/ stock height rear), but I'm looking at going a different route so I can get 2" up front and I'll do 1"ish in the rear. I also want bigger tires too, haha.

 

I want to do the darks bronze

 

Anyone ever get any mud dobbers after this, I find them in my weed wacker exhaust, and this offers a free ride!

 

Where did you get the knobs at ? Thanks

 

They're a bit pricey, but they're what I wanted. https://www.etsy.com/listing/1179467475/2020-2023-toyota-tacoma-standard-size?ref=yr_purchases

 

Not sure how it would be any different than the same size hose hanging in a different spot.

 

That's wild you mentioned the mud dauber in the exhaust. I was about to deep six a grass trimmer that wouldn't start. I tried a bunch of small engine remedies minus buying a new carb when I finally decided to remove the muffler and clean the port of carbon. That's when I noticed the bastards had plugged up the little exhaust tube in the muffler. I punched out the mud and it started right up. DOH!!

 

Sounds like a great plan and awesome choice of shocks

 

wednesday morning going into work, a deer decided to customize my drivers side.



in the middle of the towns business district of all places. i saw the first one, was immediately on the brakes (if there's one, there's at least 2 more!), it passed safely in front of me. i never saw the second, but it was probably about 10-20 feet behind the first one, it's nose hit my front drivers door, which swung the body into the rear drivers door, and then left me a surprise on the bedside panel...

 

You got the better of the two products. VLED is THE manufacturer you want bulbs from anyway