New Tacoma 2024 Alignment

Dealer doesn't have 2024 alignment specs and I need to have my alignment done after putting on 275 70 17s.

Steering Wheel not centered straight and a tad off to the right. No pulling to the left or right but is annoying.

At the mercy of Toyota to come through with the specs. Tried rotating rearward cross, to check if possibly a tire is defective but it made no difference. Any thoughts?

 

Take it to a competent alignment shop that doesn't need specs. Expect to pay over $200-300

 

Need an alignment after changing tires?

 

Or take it to a more competent Toyota dealer

 

Any competent tech will align it without specs.

It's crazy how no one can figure this stuff out.

Also TIS has the alignment specs. You just enter it in.

 

That's what I said but my steering wheel is a bit off.

 

Thank you and I hear you. What is TIS? Anyone know of a good competent alignment shop in Arizona?

 

Arizona is a large state. Be more specific

 

Near 85225 Maricopa County, Chandler or Tempe, Gilbert areas. Mesa and or Phoenix would also work.

 

And try here

https://www.tacomaworld.com/threads/az-bs-thread-4-2⁰.431790/page-5531#post-29726768

 

Sorry, TIS is the service manual basically, its online data available to all Toyota dealers.

 

Thank you. Well they must have looked because I was told no specs have been uploaded?

 

Thank you

 

If anyone is near Chandler and knows a shop please let me know.

 

Sorry @Bishop84

 

It's 100% in the manual, there's extensive specs.

I cant share data from TIS, so hopefully someone else can look it up and share it.

 

Lol just want this to be over

 

Wonder what they are doing at the dealer then?

 

Most techs give up once their alignment machine shows no specs.

Unfortunately you pay 160$/hr for bottom feeders sometimes.

For reference our machines are up to date and still dont have 2022+ tundra specs, but I carry the sheet that has all the variants ready for input.

 

I see the online TIS site. Is this information in my owner's manual or just for dealers on TIS only?