What Have You Done To Your 3rd Gen Today?

put my truck up for sale

with a baby, 14 year old and a GSD, the taco is just too small.
Toyota offered me 32k cash, or 35k with trade in. going to try and sell private party since I'm in no hurry to sell.

pics cause we like tacos

 

Same question - opposite direction. I have a ‘23 SR with the dual zone controls. Can I swap in the older manual controls? What problems or issues would @Shiro213 and I run into if we swapped controls?

 

I definitely want this visual upgrade. lol

Seriously, it may JUST make a slight difference in overall performance but I think it looks great.

 

I have a 2019 TRD Sport and it didn't come with the dual zone. WTH Toyota? I thought it was a change that came with the 2020 models like the electric seats.

 

Bought mine used but I believe you have to have the “tech” pakage. BSM, adaptive cruise and such to get dual zone. Could absolutely be wrong though

 

I took my 4Runner (RIP; thanks son) to Goodyear for a tire rotation and their new tech backed it into another car. So two claims off of a free service, and the new tech was out job hunting again.

 

My '22 TRD OR has dual zone climate controls; no tech package. I think it was part of the TRD trims for that year (as the only "options" my TRD OR came with were floor mats and door sill covers).

 

Added patches to the headliner. Wiped the suicide bugs off the front with SpeedShine.

 

If we lived closer we could just test it. Lol
When I installed my AJT 4wd knob, the installation video had a dual zone and they looked to be the same hookup that mine has. When I pick my truck up, I'll ask the service advisor if he knows.

 

I posted a couple of pictures earlier in thread in march of the beading after almost 6 months. After prepping the paint I applied 1 coat, let sit for 24 hours and applied a second coat. It’s not like old school wax you CAN apply to much, make sure to follow directions. There are also several videos on YouTube about how to apply it, or any ceramic really. You need to make sure any previous wax or protection is completely gone for best results. I havent bothered with the spray on rinse off methods, it is so east to apply I just did an additional base coat in march.

 

I agree, the price point made it worth it to me...scored it on Amazon for less than $400

 

I got a mid-rise leer shell on it today.

 

Way outside my budget man. I went 316 Mil-Spec stainless and reused some of the kit hardware. Though, I did replace many many mounting screws with M8 Button Head Flange Ti while I was under the truck.
The button heads make much more sense on a skiddy thing. A good opportunity to make sure things were straight and flush.

 

I have a 2017 TRD OR and the dual zone panel is standard on this model year.

 

I had a 2017 TRD OR and it was 100 percent not dual zone, I think the option was only available with the technology package.

 

To be honest, "dual zone" in a "single cab" only does so much. The heat or cold at the legs will be felt most because of direct contact. A little of the heat/cold from the top dash vents ... yeah, kindah. Overall, it mixes together in a single cab. You cannot keep half of the cab 10 degrees cooler than the other half.

 

Did the dash speaker upgrade.

 

JUST wanted to throw this out there, i know this may not be a truck thing, but There's a cool Brewery on Day Hill Rd in Windsor Ct. called Dudley Town Brewery. Maybe we all can have a meet and great sometime, the parking lot next to the brewery is big enough for this.

https://dudleytownbrewing.com

 

Ok I will check those out...sounds like you are getting amazing results... Nice!