1st Gen Lunchtable Thread - General Discussion

my 3/8 impact at 2 ugga duggas is the torque spec

 

I'm too poor for Ugga Duggas but i never lost my drive shaft after using a socket and wrench

 

They’re supposed to be 54 lbs ft if you’re going by the book.

 

(You don't need to on this one)

 

Busy day for sure

Kiddo had his appointment, got 3 shots, and got pricked 3 times for blood

Buddy came by with his LS400 for some diagonising. That fucking thing rides sweet.

New plants also came in too -



Just not sure about the Mayaca Vandelli since it came as a freebie and technically have no space for it -



Nitrites were below 0.25ppm so it's about time to add fish.

Going to look tomorrow for a Gourami to add finally.

 

Well, got tires, got it home. Looks like I haev wires to fix, and who knows what to do with the hvac. Blower sounds awful. Drives normally at least, no leaks.

 

Total it out, buy it back, and use the left over to cover all your expenses?

 

Liability only. I've got 2 trucks, and comprehensive would have cost me far more than its worth by now. I don't think it'll be horrible expensive to fix it, but I do need to keep an eye on the junkyards...

 

Ahh gotcha

Well, if you need something out of the Central Valley that you see on FB or something let me know

Plenty of people part out their yota's here and I've picked stuff up for others before

 

Damn that nick in the harness is going to be fun to deal with…

 

i think it'll be alrite, plenty of wire on both sides and i'm decent at soldering.

 

Well the 07 met its first deer with me otw to camp, bumper seemed to handle it fine, nothing noticeable

 

Atleast the blower motor is easy

 

Inkn

Ew the bullets didn't stop at the fender... can you claim it on insurance? Did you find the rounds to verify they didn't hit more?

 

https://youtu.be/LACbVhgtx9I?si=fYteT5Z_uN8XxsWX

 

You should measure those bullet holes

 

I got a good pic in the wild today, just had a vibe.

 

Well I tried to grab some power folding mirror internals from a Hilux surf while I was here. Unfortunately all my buddy and his friend's touch is cars so they had no clue where to even start looking. They also laughed when I said we likely couldn’t find them since they’re rare. But I ended up being right.

I've seen a handful of 96-02 Surfs and none I’ve checked had the retract button on their mirror adjustment switch. I figure only the heavily optioned trucks had them, like with the rear visor integrated fold down mirror and options like that.

I did buy a diecast Mega Crusier that I couldn’t find anywhere online. It’s been neat seeing JSDF ones rolling around.

 

happy birthday @eon_blue !!!