Long Travel BS Thread

7.5" H70
Only 37" spare in the bed

 

Damn, yeah okay, idle all day and night will do it. That’s the worst for piston sealing anyway.

And that looks freaking horrible!

 

Crazy! Most aren’t even seeing that with an empty bed and H70’s. You must be in lower hole?

 

Yeah, Im in the lower hole and with the hanger in the furthest forward position. I have the tundra 10.5 as well so I lose some up travel.

 

Ive got 7.25 up travel with my 16 inch shocks and a DMZ kit

 

Yeah, I started with 7” on the HD’s. Trying to squeak out a bit more though.

 

Technically. But pretty 50/50. 9.5” up and 9” down. Not factory frame thoigh. Raised mine about 1”

 

Where are you folks measuring your travel from/at?
Is it between the top of the axle and the frame?

 

axle bump pad to compressed bump stop

 

I’ll tell my cousin. Thanks! I’ll PM you if he wants it.

 

Using a kibbetape helps impress the dudes on the internet as well

 

Is that a 5 axis cnc machined finned tape measure calibrated and marked down to 132nd’s wound around Swiss ceramic bearings with liquid cooled dampening and an extra cnc pass on the case just for cosmetics then a gold anno’d finish and assembled with 12 point aircraft certified hardware ?

 

36 point hardware actually

 

Finance only, 32% APR from Kibbeloans

 

I was saying that to @WormSquirts when we drove mine last night. Such a difference.

 

Hey @906taco can you tell me how you prep coilovers for cerakote?

I found some coilovers on marketplace that are a little "musty" and wondering how far it needs to be torn down for cerakote

 

They need to be fully broken down, media blasted and cleaned. You can use air cure ceramic but oven cure is superior.

 

What’s the best way to extend the fuel filler for the fiberglass?

 

easiest and cheapest is buying some fuel line and hose clamps from Napa. My hack job has been holding up +10yrs , no CEL or evap codes ever