Ontario BS Thread

We have the passenger side bushing, yes

but what about the second, driver side, bushing?

that's the one i can't find anything on... or am i swapping out the entire hinge itself
with
66120-04030

https://www.ebay.com/itm/334582866271

 

https://www.toyotapartsdirect.ca/p/...HINGE--SIDE-GATE-SUP/64467185/6614304021.html

I just replaced.mine a month ago...tailgate fell right off in my hand

 

i should have clarified the driver side lol. i dropped the ball on that one
but thanks for the link, cheaper than amazoom

 

ahhhh

 

Driver side bushing is not frequently reported. In fact if you search the P/N on TW only one previous report comes up.

https://www.toyotapartsdirect.ca/p/Toyota__/Hinge/64466900/6612004030.html

I don't know if the plastic bushing separates from the hinge cup. The hinge may be a bitch to unbolt from the tailgate (the torx head stripping out).

 

>buy bracket and measure out the plastic bit.

 

^Why buy bracket at all? Clean out all the torn plastic and measure the ID of your existing hinge and the OD of the snout.

 

i'm under the assumption mine is entirely toast and i could be missing dimensions for depth/ tolerances.
but self-clearing isn't frowned upon here, so could make it as snug as possible

 

Anyone here with a 2.7L want a water pump? I’ve been trying to sell one.
Now I’ll just give it away… Brand new in box.

 

^Could you describe or post a picture of the gasket for us men of culture in SOTEC? Need to make sure it's the correct one.

 

I could use it. What brand is it?

 

Lulz... IYKYK

 

WorldParts. Got it from RockAuto.

 

@Steves104x4 anyone TW expressing down your way?

 

If you can get it to Ardbeg, I can schlep it as far as Hamilton. Can probably get it to St Catharines

 

I had no clue we could schlep on TW.
This is a big help

 

I doubt it but I appreciate the thought. Thank you.

 

We can do anything on TW

 

@Sloweburn I could bring it to Ardbeg and give it to @Saturnine

It's been a minute but always up for helping out @Steves104x4

 

What do we think about this?

https://www.apexdesignsusa.com/products/kwiklynx