What Have You Done To Your 3rd Gen Today?

One of them could be but it could also get cut out if I was to do a high clearance rear bumper, not sure on the tailgate one, and the passenger side door has a $1600 estimate.

 

Installed the aluminum sliders today.
I don't know why people complain about installing sliders. It was incredibly easy to do solo with no jack.
Took about 10 minutes start to finish on the passenger side. The driver side took a bit longer. The front bolt wasn't easy to get on and the electric box nuts were rusted.
For the bolts on the driver side that are near the brake lines I installed them backwards so it has less chance of rubbing the lines (it doesn't look like it in the pic but there is almost a 1/4" of clearance between the bolt head and lines)

 

Lookin good!

 

Looks great!

 

Love it!

 

Maybe a couple of these then?

 

Last week I replaced the spark plugs and sheared off a wheel stud on the driver's side when I took off that wheel to get at a couple of lower bracket bolts. Since I was going to have to remove the brakes anyway I decided to also replace the brake pads in the process. The outer pads had a lot more wear on them that the inner pads so it turned out to be a good decision. It was the first time I had ever replaced a wheel stud and it was so easy that a child could have done it. It goes to show that you can teach an old dog new tricks.

 

so i just ended up getting a brand new OEM tacoma short bed mat for like 150 with free shipping, itll get here tomorrow.

cant have my cooler with beers moving around that much. steady does it.

 

Installed the URD mark II Y pipe today, had a small window of time to do it but all went well. Only two issues I see with it were back by the connection to the muffler, the pipe ends up super close to the cross member there and also the gasket they provided was a bit annoying getting centered between the flanges while bolting them together. Only got to drive it about a mile so far, seems to have an odd resonance sound around 2500-3000 rpm but otherwise doesn't sound any different really. Should have it out for a longer drive soon to get a better idea of any difference made.

 

Swapped out the stock door speakers

 

When you can't open it

 

Where did you get the shifter jacket?

 

Bought it off Amazon;

$5 ZHSMS Gear Shift Hoodie, Upgraded Universal Hoodie Car Gear Shift Cover, Funny Shifter Hoodie, 5.9" Car Shifter Stick Protector Decoration(Green)

https://www.amazon.com/dp/B0CLCCG3M3?ref=ppx_yo2ov_dt_b_product_details

 

Thank you. My daughter is going to go nuts for this!

 

Went with mild/med on OTT tune. gained 3 mpg avg. paying for itself in 1 year. Get it, it’s a no brainer. dclb with .488 gears 3 inch lift steel bumpers steel underneath and roof rack. The truck is perfect with the gears and tune.

 

I told you so.

 

The lunar color body panels are prone to dents, kinda like the super white paint is prone to detaching . . .

 

A quick roadside "repair" because my dumb ass forgot to tighten the seat bolts after installing seat covers yesterday.

 

Great deal!