Pop and lock problem

Straight forward install until it came to wiring the plug and play T harness to the breaker harness. T harness has five wires and the breaker harness has two. Any ideas how this goes together. The you tube video shows two to two. Do I dare assume blue to blue and green to green? What’s the other three for?
Youtube:

What’s in the box:

 

<-----this one plugs directly to the actuator then you plug the long one the other two go inside the cab

 

Look at my pics. One has five one has two wires. Why? And yes, I’m installed except for inside the cab.

 

basically plug them together in that order blue with blue and green with green

 

you only use blue and green , simple dont over think it

 

Makes sense, but lame to ship with extra wires and not update the instructions. Thanks!

 

The other wires are for different models or if you wanted to use it on the passenger side instead.

It's a much later revision of the harness and they never updated the instructions packed with the unit. You can get the schematic if you dig around on the site though

 

Blue to blue, green to green!