wiring my front turn signals with resistor to fix the hyper flashing

hello guys i need help can anyone tell me witch color is the turn signal and ground i am trying to use resistor to fix my hyper flashing i recently installed new form headlights sequential for my 2023 tacoma SR model any help will be really appreciate it

 

@Dm93

 

I don’t know which wire but putting in a resistor makes electrical sense. I wonder what value resistor should be inserted

 

I got them from Diode Dynamics because I replaced my OEM headlights and I got LED headlights from FORM LIGHTING so it’s just my passenger side turn signal that is hyper flashing

 

Here is picture of them

 

If you insist on modifying wiring on a new truck...

It's going to be Beige for the Left and Light Blue for the Right.

I really highly recommend not using those vampire taps especially on exterior wiring, that's just asking for future issues.

Also if you do add those resistors make sure you mount them to something that won't melt because they get very hot.

 

Inside the cab are connectors IA2 & IS3, plenty of metal surface to act as heat dissipator for the added resistors and environment "protection".

 

Or an overbuilt harness to the connector to the Combination Meter...

 

hey guys so i try with the resistors and they didn't solve my problem i heard other people using FLASHER RELAY FOR LED so my question is if anyone has try this metho and what kind or brand you guys recommend for to buy

 

i would really appreciate you guys help where is locate it and where can i buy the flasher relay thanks guys

 

The 3rdGen unfortunately doesn't have slot to remove and replace the flasher.