P2441, p2445

Hey guys, got a 2009 Tacoma 2.7l 91k miles, check engine light came on, plugged in my scanner got p2441 and p2445, popped the hood noticed a vacuum hose line was disconnected, I reconnected it and erased the code with scanner, drove the truck 60 miles to work, no code, when I got in the truck to go home I turned the truck on and the check engine light came back on, plugged it in and same two codes came up, truck is running perfect. Could it just need time to reset itself?

 

Which vacuum line was off?

Nothing with those 2 codes would need to reset/relearn, that monitor runs every cold start.

 

That was the little hose that was disconnected, I’m in panic mode and am considering ordering one of those bypass kits from Hewitt

 

That’s an awfully dry rotted hose. Let’s replace that, shall we?

 

Well I figured it out, I had my mechanic do spark plugs when I dropped it off for inspection, he took off the air intake in doing so, I noticed when he put it back together the vacuum hose line was pinched underneath the assembly for the air intake line, so that had to be what was throwing the code

 

That little vacuum hose was pinched underneath that bolted section, gotta be what threw the code!

 

That would definitely do it.