Favorite 17 Inch Wheels

I saw that on a YouTube video. That's great news about airing down. Love the looks as well. The stock toyos will wear out in the next year or so and that'll be when I upgrade tires. Going to have to ramp up my hours at work in preparation if I'm going to do the wheels now!

 

Lol, I think the stock wheels you have look real nice with a set of 265/70R17 all terrains. I ran 255/75R17 ATs on that wheel for a while and they also looked good:



I now run the OR wheels again, only because I bought my truck used and they were gone before I got them, and I kind of wanted to put them back on from a purist standpoint. I really like both though and I prefer the tire selection of 17’s. Also my Sport wheels I got used were a bit scratched, and the ORs I found are 100% pristine (got them from a truck that had them removed before leaving the dealer), so I err to my OR set. Still have my Sport set just in case.

 

@Pwakchop I have two Flow Form designs that are 17x8.5 +00 weighing in at 22.7lbs. Deeper bead seats with a raised edge for added bead security when aired down. All wheels come with aluminum caps. And I currently have raw wheels ready for powder coat or matte black. Powder coated wheels go for $1000 shipped for TW members and I have quite a few colors to choose from. Powder coat takes about 2-3 weeks. Or, if you have a local powder coater you like, the raw wheels can be had at a lower cost. Shoot me a PM or an email if you're interested.

 

I am in the market as well and still researching - todate these are my favorite: https://sswoffroad.com/products/raptor-machined-silver-17x9-0-12



Please note I am over 60 and not a fan of black wheels

 

I was looking for a used set of Methods and was lucky enough to find someone to do a straight swap for my stock TRD Pro wheels.

 

Super sorry about the late response, I've been super busy. Those wheels are sweet! Thank you for the response. I will weigh my options and get back to you!

 

That's the hope! I would love a fair trade as I know many second genners like to put the 3rd gen TRD Sport/Off Road wheels on theirs!

 

For that price range, any design you like from SCS or Summit will be solid.

 

The guy I found was transitioning an older off road build into a plumbing truck.

 

You'd think he'd buy a separate company truck, but you definitely won in that scenario!

 

Don’t rule these out……I went with these in gloss gunmetal, extremely high quality for the price. Mounted up some Michelins and they are smooth as glass on the highway.

Kind of a hybrid SEMA design, very clean looking.
https://www.fnwheels.com/store/product/fn-wheels-fx-pro/

 

SCS Ray 10's Just waiting for the 17" Matte Black -10 to be back in stock and I am pulling the trigger.

 

Those rays with a - 10 are gonna poke a lot. I had them on my tacoma and tried them on the Tundra it was way too much for my liking so I sold them. I wish scs made their F5s in a tundra wheel cause those are my favorite wheel.

 

What size tire were you on? I am planning the skinnies 255/80/r17 and my understanding was the poke was not too bad.

 

I apologize I'm back and forth on this forum and tundras. Com they failed on my tundra. However in my tacoma my F5s with that same tire size looked amazing but did require a CMC to not rub.

 

We offer an 18" F5 for the 2nd and 3rd gen Tundra.

 

I would buy them tomorrow if they had a + 25 offset or more.

 

Method Racing has some +25 in 17”. I have the Method 315 in a 0 offset and they work well.

 

SEMA wheels on cyber Monday for $650 then using the rest to help pay for whatever tires I’m going to put on them. Not that I have a plan or anything!

 

I really liked a lot of the method wheels but they were all really heavy I ended up with FN BFM in gunmetal.