Let’s see some subwoofer setups!

My buddy has that RF sub, I believe it's actually ported! Puts out crazy bass!

 

Oh, I see it is ported.

 

I'm sure it turned heads! I've been trying to get 135 with a single 8 and got a 134.8 with a Nemesis 8 in 1.5 cu ft tuned to 40 hz! The problem is the lack of a back seat as I carry people around nearly every day.

 

Replaced all 6 stock speakers with 4 ohm kickers. Ran (x2) 9 conductor quickwire from head unit to amp/amp back to speaker harness. Made the enclosure myself and installed a Fosgate P3SD4 wired at 2ohms. Pioneer GM D9705 (Has speaker inputs to use instead of rcas so I could use stock head unit). Then added quick connect adapters to make disassembly easy if needed.

 

Beautiful enclosure, fiberglass? How many cu ft does it come out to? Is that an 8? Love your setup, super clean!

 

Yes it’s fiberglass over wood framing. 10” sub, no idea on cu/ft. Just wanted it to fit. thinking of buying the skar enclosure that wasn’t available when I built it. Will definitely have more than what I made.

 

Fiberglass work takes some serious skill. Kudos to you!

 

What’s some decent sound deadened now days? And anyone know the square footage for inside a quad cab Tacoma that’s needed. Thanks

 

I used second skin but only behind my seats in the rear, it worked great but I wasn't up to the task of pulling my carpet, door panels, and seats.

 

Yea I’m not doing the floor again. I’ll do the doors and back lol

 

I used Noico to do the whole floor, doors, and back wall. The roof I used lizard skin spray on stuff as its lighter weight

 

I used the Amazon Basics stuff. Worked great. I got 2x 36sq ft packs. That was good to do the doors, door cards, and back wall. Stuff worked just as good as any dynamat I used in the past.

 

Massive pain, had the bright idea to tear the truck apart 6 hours before work and then school the next morning. Driver's seat was my only seat for a few days

 

Second skin damplifier pro 2mm. I used about 3-4 sheets per door and who knows how many on the back cab wall.

 

would you happen to be talking about

$75 KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

this stuff?

 

i looked that up earlier its about 450 bucks for 28 sheets is what they recommended and that's with there memorial day sale lol.

 

Appears it's gone up in price like everything. I'd probably try something cheaper from Amazon.

 

Most of the brands on Amazon come from the same overseas factories, just find the best bang for your buck.

I’ve been working on my doors myself. 1.5 to go thank goodness.

 

this stuff...

$59 Amazon Basics Car Sound Deadener, 18 x 32" (9-Piece)

https://www.amazon.com/AmazonBasics-Sound-Deadener-14-5″-10-Piece/dp/B07XMF3KK5?sr=8-20
it was $58 or so back in december when i bought it

 

Finished getting the amp for the front 8” sub and went a different route with the DSP. Getting close to finishing the build… for now





Rick