*SOLD* Magnuson Supercharger, UCON EMS V2, & Other Go Fast Goodies

Used Magnuson Supercharger w/ Tacoma Fit Kit
Fits 05-15 Tacoma. Also fits 07-09 FJ & 06-09 4Runner but will require their specific fit kits.

Supercharger is used and in good condition. The supercharger has a URD Stealth 2.55 Pulley on it, as well as a Roush heavy duty belt tensioner. I will include a stock tensioner as well. I have a stock length belt as well as a shorter one to account for the smaller pulley. I cannot find it right now but I know I also have a quick change pulley setup with a 2.7 and 2.8 pulley, if I find it I will include that with the kit as well.

The coolant hoses are setup for a vacuum boosted truck. If you have an electric booster I am pretty certain you can make them work, or you can purchase additional 3/4" heater hose at any parts store if you need it. I do not have the standard spark plugs for the kit, and I would replace the idler bearings as well since only one of them is new. PM me and I can get it handled for you if you like. I would also have the fuel injectors cleaned/tested. They were working fine when removed, just saying what I would do if I was installing it. I may be able to get this taken care of as well.

I have gone through the TRD & Magnuson install instructions and made sure the kit has everything it needs. Most large parts are used, but I did have to purchase brand new items for certain parts of the kit. I labeled all of the loose parts in accordance to the TRD install manual since the Magnuson instructions don't include a parts list. Also included with this is an intercooler lid seal kit. It will be pictured later next to the silicone radiator hoses. I am including this since you may need it when you install the supercharger.
Pictures of everything included here:


URD UCON-EMS v2 (09-15) + Expansion harness + 7th Injector. Attached to the ucon currently is a 2015 Tacoma ECU. I think it will work in a 2014 as well but that is on you to research. You can also mate it to your ecu but you may need to contact URD for additional tuning. You can also opt for no tuning and get the TRD tune elsewhere (JustDSM on here can do it if you ship him your ecu). Things to note: I have a set of mightytacoman cam gears that I will include, I do not have the URD 170 degree thermostat.



Custom reservoir for the supercharger coolant made by mightytacoman. It is new and unused. It's purpose is to look cool and also because the stock coolant tanks are known to sometimes leak at the fittings. This one doesn't leak I can attest to that as I have one in my truck as well.


Red bullet vvti solenoids


HPS Silicone Upper Radiator Hose & Lower Supercharged Radiator Hose - Also pictured is the intercooler lid seal kit.



I am looking to sell everything as a kit. If it doesn't sell in the first week I will allow people to request some of the other items as well as put up a price for them (Custom coolant tank, vvti solenoids, hps radiator hoses). I do not plan on separating any of the supercharger parts. I will consider separating the ucon setup.

I am asking $4,500 OBO
*SOLD SOLD SOLD SOLD*

 

Wow! Amazing deal. I’d like to get in line for the coolant reservoir if you decide to separate. GLWS!

 

Good Lord and good luck!

 

Cross posting to FJ forums. Hope you guys took your shot!

 

What a heartbreak…



lol

 

I was so close... haha

 

Too many of us in line…I don’t think we’ll ever get a complete package plus extras like this ever.

Might look like I’ll regear instead, just have to see what they charge locally.