What Have You Done To Your 3rd Gen Today?

Yes, the Philips Ultinon LED bulbs.

 

Prerunner. Clean white Taco. If the funds were available, I'd like to have a 2WD and my 4X4.

 

I'm curious to see what you come up with. I just took off my softopper and put on the Thule TracRac for hauling kayaks. I already miss the covered space from the softopper.

 

Bought & installed this used mid-height bed rack from Cali Raised LED. Best $150 I’ve spent in a while.

Bought & installed a Chinese knock-off grill off of EBay - mixed emotions with this. It looks fine, installed easily, but it scratches VERY easily.

Finally, I’ve painted my center caps on my stock SR steel wheels.

 

Great guy. Love the view from his house lol

 

I'll post as it goes, still unboxed atm. Recall, I have mounted the ST on 3X3 angle iron "bed rails". Details posted years ago.
My plan is to devise "wings" welded to the angle iron with the rack bases bolted to the wings. Trim the uprights to clear the ST (and the shark fin, kind-a).

Time and effort, I'm refinishing entry way cabinets today ;-) Supposed to be a week of rain ahead, so "SHOP TIME!"

 

Got my truck back, squealing noise was the upper passenger side idler pulley that I already replaced. So must of been faulty from the factory. Hopefully fingers crossed and knock on wood this will be the last time my truck will be in the shop for a while.

Additionally I just bought a 2023 Seadoo Switch Cruise 21' 170HP pontoon boat, should be a lot of fun.

 

I just replaced my stock air filter with the TRD performance air filter. Hopefully this will be a good small investment. I paid $57 for it at my local dealership, definitely cheaper than the $79 K&N filter I was debating on getting

 

2.5" medium load front and medium load for the leafs-rings. I also have about 200lbs in the back with a truck vault drawer setup.

Overall I'm really happy with the setup, other than some squeaks coming from the rear leafs that I need to figure out.

 

No doubt...give right nut to own that,lol

 

replaced stock license plate lights with morimoto . Plug and play .
Saturday Im installing auxbeam panel and 4 banger ditch lights hopefully .

 

I threw some Kilmat in all four doors, looking to doing the back of the cab eventually. Pretty easy install just takes forever, definitely an improvement.

 

This afternoon I did a bit of de badging on the doors.

 

Last week I put on Falkens Wildpeak AT4Ws 265/70/17s. They are wider than I thought. Go nice down road. So far so good. Yesterday I had front windows tinted & like a 5 inch windshield tint. So waiting to put back on window shades. Helped on brightness inside

 

Today I put on exhaust tip. And after I installed Bilstein 5100 on rear. Test drove & it was a upgrade imo.. Next Tuesday Bilstein 5100 on front set at 1 to level out the ride

 

Does the exhaust tip change the sound at all, or does it just make the tailpipe fancier?

 

The only reason I put it in is that in winter as it is warming up the exhaust puts moisture on the rear quarter panel (because it needed to be extended) & as I drove down road dust & dirt was sticking to the side of truck. Otherwise I would not have... As you can see in picture I fluid film everything up North here. I could care less what it looks like under there. As long as it helps keep the rust out.

 

Sound. Honestly I never checked. Put it on & drove it. I was shocked at price tho. Kinda like the H.D. Hundred Dollars lol

 

New shoes ... Wildpeaks AT4 from Discount Tire. Also my Rough Country seat covers arrived. But installing in 110-degrees seems not fun so will do that later.

 

lol, I washed my seat covers when they arrived, let them dry, then got them all sweaty installing them.