What Have You Done To Your 3rd Gen Today?

I like others were just trying to help and give some info.
I even said "Not a biggee. As long as they are balanced well no harm no foul. There really isn't a problem to remove them as they aren't really used for any real purpose except for original install and it's not critical for that."
You come back and post a different picture and wheel than original post and say "you must be blind" ??
You're welcome unappreciative jerk!

 

ya you must be blind, first off I dont own a black truck You quote my truck picture the one with the silver tacoma, You said ( The yellow dot is to be mounted next to the valve stem. It looks like yours aren't ) and Now your saying ( You come back and post a different picture and wheel than original post ) You might wanna get your eyes check lol, this is my truck & mind pictures ....
Just stop while your ahead of your self you SMH

 

Work great. Covers fit behind the control switch trim.
Here is my pic:
Rough Country Neoprene Seat Covers - Review

Still look good after 1.5 years.

 

I unbolted the front seats them and leaned forward and rested on the dash/steering wheel. Did not disconnect any wires.
Had to unbolt the rear seat belt bolt to slip the cover around the seat belt.

 

Agreed ... even with the flap over the electric seat controls ... who cares? I thought they might pull over when entering the truck, but I learned from trying to sit on the extreme edge of the seat how slippery the surface is. There is little chance for pulling while entering with the surface being so slick.

 

Are you talking about the middle seat belt unbolt? There is a velcro strip in the seat cover to allow open then reclose around the seat belt.

 

What in the fuck are you going off about? The thing he quoted was you talking about leaving the paint dots, there was no photo you posted. Anyone with 2 brain cells would realize he was replying to your post about leaving the dots, but was still in reference to the OP who posted about removing them.

You're a special one aren't you? Quick to get defensive and mouthy to folks on here over the dumbest shit.

 

I was. I do not think my cover had the velcro. Might have been an earlier version. Or I may have had a moment of stupidity when I put mine on.

 

I put a neoprene wheel cover on mine for that reason.
On weekends it becomes a farm truck, so muddy hands and gloves on the steering wheel. Cover is easy to take off and clean.

 

Got rid of my truck bed stickers, I like the look alot more. Ordered a little black 4x4 badge for the tailgate. Oh and since everyone got mad yesterday about raptor lights being installed I went and ordered a “TRD PRO” badge for the front doors out of spite. I could’ve done off-road but I did PRO.

If I’m feeling cute later I might even order some “Cummins Turbo Diesel” badges for the front quarter panels, maybe even an SR5 for the rear doors. I have lots of goo-gone and time to be stupid.

 

the holders seem to keep the reels away from the bed liner by 1/2".

 

Very nice. Did you state where you got those ? I could use them. Thanks for info

 

Yes, https://www.etsy.com/listing/164905...search_preloaded_img=1&organic_search_click=1

 

the only part touching the side wall is the handle on the reel.

 

I made a platform to accommodate a fridge or tool boxes etc. This uses the OEM lower seat hinges to allow easy access to the under seat storage.

I have the materials to make a couple more. Anyone in the Orange County, CA area if interested in one can send me a PM.
Fits '23 double cab

 

Thank you. I will check it out. Appreciate it

 

Before & After. A week ago I installed 5100s in rear. Yesterday I had 5100s installed & alignment on front. No Blocks in rear - bone stock. Set clip at 1 inch on front. Total cost under a grand. 265/70/17 AT4w tires 3 weeks ago/or so. I do not off road. I do drive on gravel roads. I have drove thru 16inch of snow with no issues. As I was away from camp & didn't want to walk through to get plow. Little bugger did it . Now time to break it in

 

no kidding - especially when we all know the most important aspect of balancing wheels is aligning the Method logo in the center cap with that on the rim..... duh.... this truck must have some serious vibrations like that.... just goofing around everyone!

 

Not today but...I had to go down to West Palm Beach to help with some family issues. On the way back I stopped off at St. Augustine Beach. Did a little drive on the beach and spent the night camping at Anastasia State Park.
The drive on the beach was great. 4X4 only. Very soft sand and saw a couple of vehicles stuck, one being a Jeep Compass. The Compass driver was already getting helped out. I asked if they needed anything but they said they had it covered. I need to do better with the camera but here are some pics.

 

Love the truck color!