What Have You Done To Your 3rd Gen Today?

The front will likely settle 1/2-3/4" in the coming days.

 

Not really an added part, but I did detail the ole' Taco and she looked purty.

 

Fun weekend for the Tacoma and I, took it up some pretty rough and tight trails, even scaled a tiny waterfall and put my hitch to good use. LF wheel took some curbing damage when I turned into a wall to give myself some space, nothing a small little at home wheel repair couldn't fix today!

 

How did you fix it? I have some damage on mine I need to fix up! TIA!

 

Not the owner of that truck but they look like Reika R35 Rambler wheels. Hope that helps.

 

Right, but you can see in the pics that it is at its highest setting, not the lowest. That might work with stock coils, but the OME are longer than stock. That is a shit ton of preload and your axle angles are pretty severe. I don't see how it could ride nice, but if you are happy with it, that's all that matters.

 

Thanks!! I actually don’t post too much on here. But I have Bilstein 5160/6112 combo ( older ones at the 4/5 setting). I just switched to some bfg ko3 in 285/70/17 and got the icon rxt leaf pack installed. My old aal wasn’t cutting it anymore, I enjoy some rake.

 

I love them! I was a bit apprehensive to make the jump but once I got to see them in person I pulled the trigger so fast. Something very nostalgic about a machined wheel. I may keep the black ones and throw them on my stock 4runner. The tires still have some life in them.

 

various sanding disks on my right angle die grinder, starting at 80 grit and stopping at 220, then just clean with IPA and spray with some form of matched spray paint. I topped mine with satin clear and tried my best to blend it into the existing finish. I made a quick video on my instagram showing my fix process (I'm far from a pro )

https://www.instagram.com/reel/C8VANkDvWLD/?igsh=MzRlODBiNWFlZA==

 

Test fit the Expedition Essentials 3TPAM with 67 Designs/Ram Mount accessories. I retapped every hole for M5x0.8 titanium hardware. Gotta grow a bigger set and drill a hole in it for the Spod cable to be routed through the dash to the engine bay. Fingers crossed.

 

that is so clean. what do you use to clean it?

 

Awesome thanks! I gotta do some work!

 

Rotated tires and serviced air in all 5.

 

That is a clean engine bay!

Kudos!!!

 

Dang that looks brand new!

 

Such a clean engine bay!

 

Love this! makes the dash super clean with all the new addons!

 

they’re the Reika Rambler R35 in a 17x8.5 0 offset. As far as a machined center cap, I’m not too sure. You’d have to check in with Reika

 

Put Diode Dynamics SS3 pro in AMBER in my stock 2020 OR........ They are brighter than my factory low beams! significantly brighter, better throw, wider angle, and more useful in amber than factory white. should have done this day 1.

Also put a matte black grill in that I got free from the guy I got my cap (hey you want this too? sure thanks). definitely an upgrade over the stock gray one (truck is super white). Don't know brand or style, but takeaway is matte black is sweet. post a pic when I'm done at the hospital.

 

OEM Cast Aluminum running boards (On clearance atm @ parts.toyota) . Didn't hit the truck and only racked myself twice!