What Have You Done To Your 2nd Gen Tacoma Today?

Finished up this project today. Platform and locking storage compartments.

 

This is why I love the old 2nd gen access cab fold flat rear seats. No need to build anything for the dog or packages. Just put a towel over it and good to go. Hated the new style in my 2012 and 2016 access cabs.

 

I would have loved it too.

 

determined that my 5th no spare TPMS simulator is leaking from the PCV cups seam

Plan is try to abrade, clean, then smear RTV

over pressure with bike tire pump
Bring down to 29psi cold door spec

re try getting rid of warning on dash

I wonder the range of it. If it’s OK to store in roof cargo box or if that is too far away

 

I did the same and store it in the storage box in the bed with no issues

 

Just recently picked up a 2014 TRD Sport and have been fixing it up here and there. Just finished replacing the OEM shocks with strut spacers that were already on the truck for Bilstein 5100's with some Dobinsons coils I found being sold locally. Went ahead and slapped on some JBA UCA's as well as new sway bar bushing and end links.

Went to get an alignment afterwords only to be told it was impossible due to bent cam tabs so there's one more thing to try and fix up now (I guess it's time to learn how to weld?)

 

hangers and shackles install greatly improved travel and ride. May need to take a leaf or two out of my AP Expo springs…. Install was not as daunting when you gather up the right tools

 

welcome to TW! AKA the money pit. Nice lookin truck!

 

Hadn't thought of that, but you're surely right. Heat expansion and all. I'm sure it didn't help my case lol. It'd been probably a good hour and a half, but there was still some heat left.

 

Finally got the mushroom installed.

 

At 202k, I did a pan drop service on my transmission. Cleaned the pan and magnets, replaced the strainer, and then did a full fluid exchange (used 14qts) by pulling the hose between the top of the auxiliary cooler and the bulkhead. Some 3/8 ID tubing and a garden sprayer made it easy to collect the fluid coming out of the cooler in a jug and pump new fluid back in through the bulkhead. Took me ~30 minutes for the fluids portion. Pulled out 13 qts, put in 14, had about 1/2 qt come out when I pulled the overflow plug after running the temp check.

 

Installed the redarc brake controller (still troubleshooting that) and installed rear timbrens to get ready for the camper's maiden voyage this weekend.

 

What kit did you go with?

 

Pulled our 3,700 lb pop up this weekend for the first time with the brake controller hooked up. I’ve got the Tekonsha and had to set the boost all the way up to feel the camper brakes working.

 

Welcome to Tacomaworld! You're going to have a blast setting up your rig.

 

Are the switch backlights on this unit bright like the all the aftermarket ones I have seen, or are they more on-par with the OEM stock drivers switch backlighting on the Tacoma? It's the one thing that has kept me from doing this mod.

Thanks in advance.

 

...I'd rather not talk about it.

 

pics from the previous build.

I just redid it in MDF.






I used these for legs across the front

$16 Masendelk 6" Metal Furniture Legs Stainless Steel Adjustable Legs Black Metal Legs Round Cabinet Legs for Coffee Table Cabinet Desk Sofa Shelves, Pack of 4

https://www.amazon.com/gp/aw/d/B09QSYL48Z?ref=ppx_pop_mob_b_asin_title

 

I've never seen the aftermarket ones in person, but these are not terribly bright. I wouldn't say they are as subtle as the factory ones either, but very tolerable when driving at night. Mine are the blue ones but I wish I had the white. I use the auto switches almost every day.

 

Welcome to TacomaWorld!