Uniball UCA Rebuild

Hi all, I’m going to be rebuilding my All-Pro 1.25” Uniball UCA. This will be the 1st uniball rebuild and I can’t see the markings on the uniball to verify part#. The part from All-Pro is about $84 a piece but from what I can tell from the measurements is that they are FK Bearing (COMH20T) and can be had for as cheap at around $45 each elsewhere. Safe to assume same bearings?

 

I'm running FK bearings in my total chaos arms. As long as the measurements you took are right, run it. Way cheaper than going through the manufacturer of the arms.

 

Thanks. Kinda like Toyota branding a Denso situation? I like parts that can be sourced generically and locally.

 

All-Pro advertises "FK uniball" and FK doesn't make many versions in that 1.25" size, so yeah same thing.

 

Per the spec's on the allpoo website you need COMH20T-F1.

https://www.offroadwarehouse.com/product/comh20t-f1-tighter-teflon-spherical-bearings-125-bore

 

^It's interesting All-Pro/Wheelers sells the tighter -F1 version for less money ($48):

 

Exactly

 

Maybe because these bearings sell for around that $48 price elsewhere without being branded as “All-pro”

 

How many miles did the original uniball last?