Dark Anthracite Wheels

Wheel Help (no, not that question)

Hey all, I’m looking to get the OEM Dark Anthracite wheels, PT94635160, to replace my 2023 SR steel wheels when I get it.

I’m quite new to this all so I tried to do my research but just can’t find a definitive answer

I know I’ll need different lugs and TPMS - center caps as well if they’re not already included in the wheel set. Do I need anything involving a valve stem?

Can anyone link the OEM 20 degree TPMS sensor used for alloy wheels and silver lug nuts?

Am I going to need anything else besides these things I mentioned?

TIA!

 

I think you answered your own question? The TPMS sensor is part of the valve stem. So if you get new ones, they should be the ones that work with the alloys.


I believe Toyota wheels come with the correct center caps. No need to buy them separate.


You will need the new TPMS sensor to be programmed. That is a normal part of the mounting service though. If you are keeping your steelies as a second set, write down both set of sensor IDs so that they can be programmed easier later.

 

Okay thank you for your response. So I need 20 degree TPMS will go with the alloy, I am not sure how to differentiate them when looking online? Same thing with lug nuts?

 

Good question.

What I usually do is check the Toyota site. There's a parts section under the Owners page. Find the TPMS part numbers that go with alloys and then google those to find a good price.


I believe the Toyota alloys all use the same flat seat lug. It has a taper on it that can be used with a steelie in an emergency. These came up in a search and look similar, but the head is a bit longer than I had:

https://parts.toyotaofgrandrapids.com/oem-parts/toyota-wheel-nut-9008494002

 

Thanks for your help

 

You're welcome!

 

I'm new to this also, and looking for the same outlook. So will the silver lugs from the steelies work on the new Toyota alloys?

 

No.