What Have You Done To Your 3rd Gen Today?

Not me. I'm thinking the dealership

 

I use the motivx tool and a ratchet

 

If you use the motivx make sure it's the new configuration. Their early version had cutout(s) for the “ears” and relied upon that contact. Their new version just uses the flats, like a box end wrench on a bolt head/nut.

 

Exercised my new leaf springs:

 

You by any chance have a tailgate seal?

$50 ESI ROK Block 4.25" Width Tailgate Gap Cover and Ultimate Tailgate Seal with Taper Seal 6ft for Sidewalls

https://www.amazon.com/dp/B00R8KBV9Y

 

This is the one you don’t want.

 

Not yet. But definitely going to pick one up.

 

In the spirit of the thread, I drove my real 3rd Gen to the mailbox to pick up this neat little Hot Wheels 3rd Gen. It's modeled after the Taco owned by one of the Hot Wheels designers.

 

Those wheels are nice! Would like to get a set.

 

I was going to install one but then I saw that I needed to leave my bed open for 24 hours. Do you really need to do that?

I also have a SP X1 and I got a BedRug hoping it would do the same thing and make the bed more comfortable.

 

Thems are some big signs behind your truck. What was it that you picked up from the mail box again?

 

Morimoto Fogs!

 

Thanks so much bro! I appreciate your support!

 

I did an entire audio system upgrade with this Head Unit as the main focus. I am not an audiophile by any means but holy crap!! I nearly sat in my truck all evening just listening to music and playing with the head unit. I love it so much! Here is a list of everything I used.

Kenwood DMX958XR

$91 DS18 PRO-ST OEM Subaru/Toyota Upgrade Bullet Compression Tweeters with Crossovers 1.9" - Car OEM Tweeter Upgrade Kit for Many Subaru/Toyota Models - Replacement for H631SFJ101 and H631SFJ100 (Pair)

DS18 PRO-ST 1.9" Tweeters
Kicker 6x9" front door speakers
Kicker 6.5" rear speakers
Skar Audio Single 10" Loaded Subwoofer
Kicker 47Key200.4 4 channel Amp
Kicker 47Key500.1 500w mono Amp.
TIDAL subscription.
Parking break delete.

Again, I'm not an Audiophile but I am in love with the way this turned out. It was a fairly simple and streamlined install.

Now please excuse me while I go sit back in my truck and listen to music.

 

Finally a week of relaxation.

 

I glued on some closed cell foam with a slit cut in to allow the door clips to pass.

 

How much is the Tidal subscription? You like it?

 

The saga of the Spod/3TPAM continues. It was over 100deg again so, back at it. Why go swimming when you can sweat your sack off in the garage? My only solution to the controller/steering wheel proximity, since I am mating RAM mounts to 67 Designs parts, was to get creative. I checked the 67D website and looked for anything that would help and found nothing. Dremel time. I cut off this gear piece so I ended up with a flat surface. I then used the 67D Spod mount as a template, drilled and tapped holes, and will be prepping for paint this afternoon.

 

https://tidal.com/pricing

Pricing has come down since I first got it a few years ago but as of July 24th they will no longer support MQA.

 

Added an impressively high quality Prinsu style knock off roof rack and light Bar, Apache case and 8.2’ awning and changed MXT 275 antenna location to have a better ground plane up on the roof rack.