Milwaukee Tools

like this?
https://www.milwaukeetool.com/Products/2767-20

just like everything else, i'd love for it to be more, but otherwise works on 98% of everything i use it on.

and if it don't take it off, i'm already planning for the torch, BFH, and my long breaker bar with add-on cheater bars, and getting a replacement bolt, because it's not going back together how it's coming apart.

 

which m18 impact do you recommend? mostly using it for lugnuts

 

Definitely don't need high torque for lugnuts

I've got a first gen M18 mid torque that I use for lugnuts, and on the trail many times

Still runs like new years later

 

something like this is better?

https://www.homedepot.com/p/Milwauk...h-w-Friction-Ring-Tool-Only-2962-20/313511878

 

Exactly what mine is rated at so yeah, but I've got the older Fuel version

Have used it on many vehicles both mine and other people's

 

ok thanks, looks like I can get it with (2) 6.0 packs and charger for $270

 

Home Depot hack deals are normally the best way to go for the most savings

 

The mid torque impact has plenty of power for 80% of vehicle work. If you get the m12 stubby impact its a good small companion to the mid torque impact.

 

or just get this??

Only need something for when I or someone else needs their wheel replaced on the trails

https://www.homedepot.com/p/GEARWRE...-lbs-Electronic-Torque-Wrench-85076/310123712

 

torque wrenches are only as good as their last calibration date.

harbor freight has some click type torque wrenches that can be had for $10-20 at different sales times. i would suggest one of those first to see if you use it before blowing the money on a fancier $150 version.

but torque wrenches are really only for the last final tightening step. it won't help at all for wheel removal or initial installation.

 

What type of work are you doing needing a torque wrench? Honestly I pretty much only use mine for internal engine/transmission bolts.
The click type ones are probably a better bet if your not using it regularly.

 

Just repairs on the trail, probably go out once a month or two

 

I definitely would not bother bringing a torque wrench on a trail run. While every single bolt and nut has a torque value including valve stem nuts, the radio antenna, and the internal trim bolts. You get a feel for how tight is right fairly quickly and 95% of bolts/nuts do not require a exact torque. Spark plugs for example have a exact torque spec but when you buy new ones there is an acceptable torque range listed on the box.

 

Uhm...no way dude

You're going backwards about it

 

How do you feel the 235# for the axle nut or 90# for the lower spindle bolts after trail swapping a CV? Can you hit 235 with a normal 1/2 ratchet wrench or just let the Milwaukee high torque eat.

 

Its a bitch torquing a axle nut down with a torque wrench cause you have to hold the hub still and need a lot of leverage to hit 235 ft/lb, not something I would do on a unlevel muddy trail side. I would just run the m18 mid or high torque till it doesn't tighten any more.

Edit - realized I dont think I answered your question. I would rather the high torque for a axle nut especially for breaking it loose but with the mid torque and fully charged battery I would trust it to remove and tighten a axle nut assuming its not rusted in place after 10+ years.

 

If you’re running around with a big ass rattle gun for wheel nuts you better grab some torque sticks. I love my 2767 but I use my 1/4” 2757 more.

 

New M12 hedge trimmer arrived



This thing is sweet

 

Didn't get a before pic, so here's a quick screenshot of the lavender plants I trimmed down



Freaking thing was huge and would get in the way when bringing stuff in or walking the stroller out

The trimmer was quick to trim it all down



It's 102 degrees out though so actual trimming of everything else will be done on another cool morning; ain't going to do that shit now

My only gripe is how unbalanced it is; this is because you need to use your wrist to manipulate it at different angles for trimming stuff like this down

 

Nice. I've been putting off trimming out front as I have an old school PITA corded version.

As for your gripe... what size battery are you using? My bro in-law had the same complaint with the leaf blower until I recommend he use a larger battery.