Overhead console wire harness

I open the overhead console and find out it does have 2 connectors (1 for the lights and other one not in use) I am wondering what is meant to connect on this one? I was about to install a FitcamX (universal because supposedly it’s not connection close by) but I was wondering if is an adapter to plug it in that one ( I did install one in my 2018 Camry and it had a harness to plug it in something like that one)
I will add the pictures.

Does someone knows what it is for?? Thanks

 

That connector is for the optional accessory meter that displays ambient temp and compass direction.

 

Since your Taco doesn't have that feature you could tap the IGN fused source and ground.

10 slot connector(s) with 040 terminals
https://www.easternbeaver.com/Main/Elec__Products/Connectors/040_Connectors/body_040_connectors.html

 

FWIW: On later 2nd Gens, the connector on the right in pic #3 is for powering the auto-dim review mirror, and if equipped, for the sensor and the wiring harness for outside temp display in the mirror.

 

Different connector, more slots.

 

Yes. Correct. There are -two- connectors shown in pic #3. Just trying to cover all of the bases.

 

Yes, I was referring to the 10 pins connector but Dm93 and the others clarify my doubt.

thanks all for your answers.

 

OP, you going to order the mating connector so ya don't cut the wires?

 

Yeap!!

 

Just send it!