Transfer skid with no bump

Does anyone know a maker of a transfer case skid plate without the little exhaust bump? The first thing I did when I bought the truck was reroute the exhaust so it would not get snagged or crushed. The skid plates just takes even more clearance away as they all dip to make room for the drooping stock exhaust.
Thanks everyone.

 

Almost all companies offer an exhaust rerouted one

 

RCI makes an exhaust rerouted transfer case skid plate that is flat (https://rcimetalworks.com/product/2016-tacoma-transfer-case-skid-plate/). I initially had the plate with the "bump" and got a flat replacement from RCI after I rerouted my exhaust. If you already have a cross member from RCI for the transfer case skid you can buy just the flat plate so you don't end up with an extra cross-member you don't need.

 

What companies. All the big ones I have searched for nothing. I have also searched up and down. I did find one once but it was an off the wall small maker and I now cannot find it again. Also the link that was sent from a reply sent me to the skid plate with the bump and no mention of a bypass flat one. do I have to contact them directly and ask for one because there are none advertised or mentioned.

 

There should be a drop-down selection on the page I linked you. One of the drop-down options is "Vehicle has exhaust re-route modification" which is for the flat skid plate. The photos on RCI's website unfortunately only show the plate with the bump.

 

Look no further

https://www.bayareametalfab.com/2005-2023-Toyota-Tacoma-Transfercase-Skid_p_70.html

 

YES!!! Thanks a ton lit_taco. SOLD SOLD SOLD!!

 

no worries @JLee got you covered