Long Travel BS Thread

TPS issues, sensor issues. Everything’s pinned at 300* and throttle won’t stay working. Out of the blue…

 

That’s annoying. This all happened once you installed the new transmission and got it back on the road?

 

Not even. Happened a while after. Been driving it around a week and now this pops up.

 

Mitchmade housing. Looks beefy.

https://www.instagram.com/reel/C9v4LctvV2H/?igsh=MzRlODBiNWFlZA==

 

16" stroke 3 tube

 

you better get a lot more specific with how you need those 3 tubes laid out or you will have serious tire clearance issues

 

100% ask me how I know....

 

I'm assuming style 2??

 

Pmed you

 

2 or 3-tube style, or you can go with a customized setup. I think i have 2 up front and one inside so the outer shock has no bypasses exposed. but Style 2 is the popular choice for tire clearance.

 

Made it to SA
Catch can on the truck has a one way valve that went bad
Causing the vacuum on the intake to be non existent and pressurized my crank case seal
So
Lost about half a quart of oil and also lost a V band at some point on the drive.
Not entirely… just the clamping pressure..

so tomorrow will be fun

 

3 tube style

 

And of course when I go to buy the JD fab shock bucket mounts, they don't have it listed anymore....

 

3rd gen right? These ain’t the ones? They also make the bolt on ones with the frame braces.

edit: or are you talking about the fronts? I haven’t seen them list those at all yet.

https://jdfabrication.com/collections/gen-3-tacoma-16-6-lug/products/rear-shock-mount

 

Yeah Im looking for the front

 

Were they ever listed? When I was at JDf a few weeks ago I saw them in person installed on a truck but Jesse did not mention if they were available online.

 

Shitty. What did Holley say about this?

 

I swear they were on the website unless I'm just imagining something haha

 

Told me I had a bad sensor ground somewhere. I went through it all and did continuity and resistance checks in every wire.

 

I had similar issues with a different system that was an issue with the pin crimping. It deteriorated and would manifest after like a bump in a LH turn sometimes. Super irritating.