What Have You Done To Your 4th Gen Today?

Finally solved the rack dilemma I was having. Solved it by giving up on the JetStream cross bars, as much as I did like the look, and replacing them with HD bars. Lesson for all the folks who land here from Googling it: TrackTowers do not allow for adjustment of pitch and, with JetStreams, you're gonna want to adjust it or clamping accessories like JayLows are going to sit WAY off. Like, unusably off.

 

Finished up the rear today.

Icon Tundra bumps (which are a perfect fit) and 2.0s

 

Got her aligned. These Icons are very very nice. Ride similar to stock but more firm and planted. Not harsh or uncomfortable at all. Highly recommend

 

Awesome that you got it done @Gmak621 . I loaded the piss out of mine with tongue weight the other day. Handled suprisingly well. Not so well with the stopping. Didnt realize that you have to "setup" a trailer for it to turn on the trailer brake system.

 

Badass. Couldn’t imagine ever doing this with a third gen

 

The 3rd gen would have to swap places with the Kubota.

 

Added another plate

 

Where did you order you TRD aluminum boards from? I'm ready to order found them on Cheapest Factory Parts | Genuine OEM Parts & Accessories | Manufacturer Warranty at a good price but I don't know about ordering from there no phone number just email. I'm going to order a bed step also. Let me know guys where are the good places to order stuff like this?

 

Installed Lasfit liners and @At The Helm 's dump pipe! Now I got to figure a place to store this thing.

 

Your website is $906 and a little sketchy. https://parts.capovalleytoyota.com/oem-parts/toyota-cast-aluminum-running-boards-pt73835240 is a little cheaper and a Toyota dealer.

 

grizzlyoutlaw. that has to be near max towing rating? how much does tractor weigh ?

 

Unsure of the model number but with the bucket and box plow probably slightly more than the Tacoma. Add the dual axle steel trailer and yeah.. I'd say that's around the published max. That ass end is crying uncle!

 

KB Voodoo Pro-X bars over a Truxedo Truxport.

 

These have the electronic parking brake calipers?
Domestic have these, require high end scan tool to disable in order to change brakes.

 

Factory upper control arms? How did the alignment go?

 

The radio knob is one of the most flimsy pieces of trim in the cab, tundra owners have been dealing with broken knobs for a bit now. They use the same knob as the new tacos.
Billet knobs don’t break.

 

The problem is the shipping a little over $200, i’d like to find someplace close to Western KY

 

I said farewell and added it to my dump run a few weeks ago

 

Yup factory UCAs. I turned the Icon’s down four full turns to lower it. Was way too high. I took it to a highly reputable guy that only does alignments. It’s a little off currently. Pulling left. I’m gonna bring it back to him next week and get his thoughts on it.

 

Correct.

That’s highly possible. Or you can disable the parking brake with the engine off also, so I’m not sure