Tacoma 3rd Gen Harness for Yotaverse V2 Tacoma Pro Grille w/ V2 Pro Grille LED Light Bar Kit

Just one but explain your setup? Why do you think you’d need two?

The T combines parking lights and DRL into a single feed with diodes.

 

same grille as OP.
It has three set of lights.
The light bar I plan on wiring up to a trigger system.
It has a set of raptor lights and a set of side markers that can be run as DRL and turn signals.

 

If you need two or more outputs then I have splitters and an extra diode module per output. Given that the diodes are 1A so I prefer to only use them for single circuits.

I don’t have an explicit sku for this but it’s included with the v5 and dd backlight skus.

Photo is probably better than words.

 

And just to be clear when you say parking lights, you’re referring to turn signals right?

 

I really do hope you are punking me.

 

Hello,

I've got a '23 TRD Sport with the Pro Grille with the raptor lights just connected to turn on when the lights are on, not DRL. If i wanted to wire up those so the side DRL's/amber turn signal are connected, which harness do i need, and do i need two? Or can i connect to the passenger turn wire by taping in to the turn for the passenger side?

 

You don’t really want the turn to flash grille lights on one side. At least I hope you don’t.

if your truck came with OEM LED headlights then an LED T harness gets it done. If halogen then halogen T harness.