What Have You Done To Your 3rd Gen Today?

Some new Timbren bump stops added today

 

Getting ready to go drill holes in my tailgate now… more to follow.

 

Wooohoo, almost finished with mods, only thinking to change tyres.
For now -
Changed both bumpers -
rear - Body armor PRO SERIES REAR BUMPER
front - Steelcraft Fortis HD bumper
Lights - rear lights - Windjet clear with sequential turning lights
Front light bar - Rhino 20", 2 cube 2x2 Rhino, and some cheap noname for foglights.
Head unit - changed to Height10, for wireless android auto - AAwireless (at first tried to use motorola device but after 3 months it stopped working at all)
3 cameras - front and two on each side under the mirrors
Lift - bilstein 5100 + OME 2885 front and bilstein 5100 + AAL +1.5" Icon.

 

RIX TUX ... is a "no". Next?

 

for better MPG?

 

This must be the 2024 sport I found in a parking lot today. That's a heck of a lower deflector.

 

One of the nice things about smart caps is magnets. I had a bunch of stuff stuck up with magnets in a smart cap.

 

Got a sibling for my third gen for when I come back to the states. Diesel and manual.

 

I thought I was done running wire through the firewall…… and I need one more spot for a button, also gotta move the vsc button

 

You can bring that in?

 

Part of my hiring agreement with Argentina and the company I work for.

 

Damn. I miss diesel. My truck just sometimes sounds like one.

 

And then some….

 

I hope that works out with for you! Will the States allow it to be licensed?

 

The license plate mounting on the Outgear Solutions high clearance rear bumper left the plate hanging a good 2 to 3 inches below the bumper. It was just begging to be disfigured. I measured three times and drilled once and mounted it to the tailgate. I’ll wire up the LEDs later.

 

I did something similar:

https://youtu.be/vB_Cakf-XSk?si=N_e7bMYe4Y6sFPuN

 

I thought you edited the photo until I saw the light.

 

I see, you got the last laugh!!! Much nicer skid

Buahahahaha!

 

Let me know if you make it to FL, I'm near Tampa