What Have You Done To Your 3rd Gen Today?

Do the MAF too while you're at it. The truck will hesitate a time or two after when you go to start it after, but it makes a big difference in throttle response once cleaned.

 

good looking bumper

 

slowly back away from the keyboard

 

did the prop rod break?

 

No, but at my age things like this help

 

Thanks. Like the minimalist design.

 

Thanks, those are cool but it looks like it would mean more holes.

 

Changed the oil.

Got all the major maintenance items outta the way between 60-70k.

F/R Diff fluid, xfer case liquid gold, trans fluid, brake pads/fluid, couple tire rotations, couple oil changes, wiper blades, air filter, cabin filter, checked torque on u joints/u bolts, bed bolts

I should be sitting pretty to not have much maintenance this winter besides an oil change or 2. Glad I spread this out over the spring/summer.

I have to hit my exhaust with another coat of VHT before it gets too cold, but aside from that I'm good

 

For anyone else having smoke issues try Ozium. Took care of the stale cigar smell left in my truck courtesy of an agriculture/livestock inspector in Patagonia.

Shit smelled like almost burnt French toast, the rotting grass you scape out from under the mower, and dried cow shit for like a month even with windows open, air freshener, you name it.

Wife got sick of hearing me bitch about it every time I called and sent some Ozium down. Glad she did.

 

Ozium is one thing I looked into. It was a lot more pricey at retail and for some reason around me they only sold tiny cans of it in stores. It was available at that place with the world's biggest selection in a larger size. I just opted for the meguairs product mostly for the delivery method in to the vents. The vents seemed like where I could still smell it with the AC on and windows closed, even though I always smoked with a window down. I could set it off the Maguires product and let the AC system pull it in. With Ozium I'd figure id have to spray it in the recirculation intake while in the cab with it going. Knowing my luck it would probably blow it out in my face.

 

Replaced my tailgate panel with a 15” x 55” sheet of 1/4” King Starboard HDPE. Installed rivnuts and 1” 1/4-20 SS button head bolts for the lower section, and used a forstner bit to countersink them. Also had to trim 1/8” off the 2 rubber bump stops for the tailgate to close properly.

now I can put my beer down and not have it fall over sheet of HDPE was $60 from a local marine shop in town. $10 on hardware and $20 for the rivnut tool.

 

Amazon?

I use this to clean the ac coils and then follow up with the big can of ozium. Not for smoke, but just regular cleaning. Seems to work well.

$20 nextzett Klima-Cleaner Pro Air Conditioner Evaporator Cleaner, 10 fl oz

https://www.amazon.com/nextzett-961...44&sprefix=ac+car+cleaner+foam,aps,145&sr=8-2

 

Yes, Amazon....where else lol
Where do you inject the foam? I'm guessing it turns to liquid and comes our the drain hose.

 

Installed my BHLM custom headlights from Kevin @no vtec 4me today. The pics don’t do them justice. Kevin installed DD switchback halos, smoked turn signal covers, and smoked clear side markers. Kevin improved my OEM headlights beyond my expectations.

 

I started the truck turned on the air on recirc got out closed the drivers door opened the rear drivers door sprayed for 20 seconds and closed the door and let the truck and ac run for about 5 mins. Took two times of that to kill the smell.

 

Changed out the Rear Diff oil for the first time on this vehicle. I didn't see any metal shavings/glitter in the oil or on the magnetic plug, just slug.

 

What products do you use for deodorizing? I have an older 1988 Subaru that had sat for a bit and I don’t want an over chemically smell but it has a musty smell I just can’t seem to get rid of no matter how many times I’ve cleaned and shampooed it. It’s had it since I bought it a few years ago. Might just be baked in at this point. THANKS!

 

This is on my list to do soon. I’m at 49k and due for an oil change in about 2k, might just do it then.

 

Basic 15k mile maintenance; oil and filter change and tire rotation. Used the Motivx tools, which are very nice.

Took the opportunity to install a Fumote valve 133S. I wasn't thinking about it being brass, torqued it down, and this happened.


Luckily I was able to extract the broken off nipple from the pan without damaging any threads using an extractor. I had purchased two Fumoto valves, as I planned to put one in the Highlander. I installed the second valve hand tight and then a quarter turn to snug it down.

Now I need to go find another Fumoto to use for the Highlander.