What Have You Done To Your 4th Gen Today?

Today I filled out the survey from Toyota.

biggest issues:
- Siri / Headunit bugs
- hard shifting on first drives of the day
- Bedside caps curling up.
- Poor PPF installation (folds, bubbles)
- steering wheel backside plastic, mushy/non-tactile button feel.

“is there a feature you would like to see added to the Tacoma?”
me: V6 engine lol

 

painted the tow hooks red

 

Is it the front on the bed near the back window that your caps are sticking up a bit? Mine are as well

 

Yes. I checked mine because I saw another post or thread about it on here!


To add to the thread topic, yesterday I put the plastic trays back on my truck, and it took me like 15 minutes for 8 bolts because I couldn’t get them all started for some reason on the first 3 tries, I had to spin around 3 times and sacrifice the spider living in the corner of my garage for them to go on properly without crossthreading a bolt.

 

How long between purchase and survey?

 

TTV6!

 

29 days it looks like

 

Changed my light bar to the Baja Designs XL linkable. Definitely lights up the world at night!

 

What lights on your bumper?

 

It’s a 20” Baja Designs s8 in amber along with their squadron pro ditch lights.

 

my bedside caps are doing same. Have bakflip cover. Do you have a bed cover causing this?

 

no, not yet, but I want the toyota hard cover eventually…

hopefully the dealer will try to replace it first before stuffing it with double sided 3M tape or something…. Or updated parts come out

 

If you get the chance, the Kranzle 1322TS is worth the price of admission. Harbor grey paint on the walls?

edit: The Gtechniq CSL/ExoV5 combo has held up on my truck for over a year, but is do for a re-coat. Koch Chemie GSF wash with P&S Beadmaker is the trick for upkeep.

 

Actually Repose Gray from SW. same as the inside of the house. Kranzle is the bomb but about triple the price. The Activ works for me and what I do.

 

Removed my crooked TRD bed decals....man what a PIA that was

 

A little late to the axle dump party, but I arrived all the same!

6 weeks from online order to pickup at a local dealership. 30 minute install using a hi lift jack to pull the body away from the axle and a socket wrench. I also dropped the spare but I'm not sure that it was necessary.

 

Yep - after about 3 mins of trying to remove my decals I wish I’d never had started. Massive PITA. I got them in the end.

I had a Ranger previously and the decals on that lifted off in seconds. Not so with the Taco.

 

I got about 1/4 of the way through one of them after about an hour and said F that. I ordered a 3M Eraser wheel and both sides were done in 10 min.

 

i might have to try this out.. i got one of them off after spending way too much time, and unfortunately scratched a bit of the paint in a few places cause i was going too fast towards the end like a complete idiot... 10 min sounds much better lol

 

I gotta ask...how bad were they?

I mean, mine seem fine.