Another Truck?! Third Time's the Charm TURBOCHARGED

I mean under street conditions it's not going to spool that fast unless you floor it. But if you do floor it it'll get up there lickity damn split. Driving like a reasonable human being it's not like you're driving something volatile or anything. But the power is on tap if you need it

 

Can confirm, it's fast and fun.

 

I feel like all it would take is one ride-along for me to wanna v6 turbo swap my truck lol

 

Hell if you find yourself up here you can drive it yourself if you want.

 

making me want to turbo my truck...

Post another WOT pull vid so I can bench race the setup

 

lol I've gotta get a camera man then

 

You should be able to make more power than me pretty easily, that engine flows better and is ever so slightly larger. Only thing would be how tunable is it with the computer you've got and whether or not you're knock limited by compression or cylinder head design.

 

yeah it should... theres dudes making 650whp on the stock bottom end now with corn juice.

realistically I have to finish the body on the race truck, then the sus on the Dcab, then maybe a 2GR in the Mr2, and then maybe a 2GR in the race truck all before I actually add more power to the Dcab.

I should film a full pull sometime, but theres a 40-70 in that one youtube clip I made.

 

This one is pretty old, but there's 9 psi, lazy boost control, and less timing than I'm running now
Another Truck?! Third Time's the Charm TURBOCHARGED

 

That 3RZ we've been working on got plopped into the truck yesterday, not really installed but put in to see how it fit. Fits well all things considered, have to angle the downpipe inward a little more though as it is just barely touching the frame currently, looks like there's room to make it curve around the firewall bump for the AC

 

Okay that 3RZ is now actually installed in the bay with a trans bolted up and everything. Doing fuel system today and other odds and ends... mostly just putting off wiring haha.

 

A little birdie mentioned you may be doing a group buy for some rods, if that happens let me know. While I'm certainly not in a rush having a second motor to tinker with might be nice to have for when this one finally gives up the ghost

 

Jayson been giving my secrets away huh? I think we could add another in on that. Admittedly I've been very busy with projects as of late and haven't had the time to confirm dimensions but as soon as I do we will progress to confirming a number of rods to order and I'll let you know price and times then

 

Yeah it was the Jay bird alright haha. I'm in no hurry

 

Probably going to get a jump on some projects this week, my inner bed is being bedlined and I will begin to rewire somethings to take advantage of the AUXBEAM SSR kit I got. Also going to take a minute to wire in a speed sensor to the Haltech.

 

Any efan progress?

 

His ofans is taking off like crazy

 

Needed to show off more than just his horsepower, I guess

 

Laugh all you want but I saw that sneaky donation you made last night...

I will try to make some efan progress soon, truck is kinda apart right now for general maint so I'll work that in too.

 

I wasn't sure if you mean effing progress or Electronic fan at the first