Just Noticed

If you look at the rubber around the back window and the front of the bed, the drivers side seems lower than the passenger side. Anyone with a clue? (Taco lean)?

 

Now go look at your rear bumper…

 

I'm sorry to say but I think your truck is totaled

 

Take a longer look the body panels all round the truck are a bit off.

 

Part it out.

 

I will pay you $25 for it and you will not worry anymore.

 

I just realized I unintentionally started a "This must be a Friday thread".

 

Talk about MPGs and oil change intervals, as well.

 

Could it be that the bed is not level with the frame? The cab may be level. The bed may not be mounted square on the frame. I have a shell on my truck so can't easily see if my truck is catawampus too. Probably plenty of Tacomas out there in the same condition.

Yeah it's Friday

 

Your bed is probably not the most reliable datum...

 

If the bedsides are square and the bed does not rock by hand, probably just a couple of bolt-holes on one side at a different height (.0003 inches) than the other side.

 

Are you sure it was unintentional?

 

Classic

 

You beak-ing annoying.

 

Could be your driveway is higher on one side.

Turn the Taco around in the same spot and see if it repeats.

“35mm” cameras so to speak (cell phones are probably worse) squeeze everything you are trying to get into the shot. You’ll need a studio type camera to truly show the diff.

Shadows play a part too. But honestly, don’t worry about it and enjoy the ride.

 

Cmc will help.

 

All you need is a 2" lift and 33" tires, and ALLL your problems will be solved.......

 

go off road and do some flexing and it should be different