What Have You Done To Your 3rd Gen Today?

Indeed. Was set on 33 skinnies, 255/85r16. Wildpeak AT4W's. Still double checking reviews around here to be sure I'm happy with that

but before I get tires and post-lift alignment, I took it for spin around the block with full lift installed (leaf springs, rear shocks, front springs and shocks) and I have a minor vibration accelerating around 20mph and some steering wheel shake decelerating around 20mph. So I'll be playing that game of chasing vibes (check driveline angles, consider shimming down the carrier bearing with washers, maybe rear axle shims, hopefully not the ECGS bushing as that seems like a messy job).

For those who had some vibes and steering wheel shake after lifting, am I okay to carefully drive around town now or should I keep her off the road until I sort out the vibes? (Will re-check torque on everything I touched)

 

I also have the G900. I love everything about it except the night time brightness. Even with it set to the lowest brightness and it's low light detection it's still too bright to use at night. I've been looking at static cling tint films to put over it, but everything I find is too dark and it makes it hard to see during the day even at full brightness.

 

Put new tires on and then get alignment. So everything is done together and you’ll know when things start going south.

 

https://www.wheeleveryweekend.com/

 

Bored, wanted to try a new steering wheel. Picked up an all black leather wheel from Revesol on eBay. Looks exactly the same as the ones the vendors sell for way more money.

Also put the Meso black trim pieces on with it.

So far after a few days I really like it.

 

I have sworn off polyurethane bushings. Not once have I used them and gotten a good result. Just use rubber if you can get them.

 

I wish they made this one with red stitching, without the red stripe.

 

F.

I've loved every set of poly bushings I've ever installed in anything lol.

 

Same, I went crazy with Whiteline bushings on my Subaru

 

Man I’m glad they’re working for someone I’ve still used them in a couple of older cars that I can’t manage to find stock replacements. So hopefully those work out. But if you guys have any tips I’d love to hear them. Feel like I’m lubing and installing everything correctly.

 

Hit them up maybe they would

 

Thanks for tip on the astigmatism. I just had some ceramic tint installed today and am looking forward to going to work in the morning.

 

Every time I see a GFC or Alu-Cab I start thinking about selling my DB. I like the security aspect of the DB but it really limits bed space.

 

255/85/r16 - falken wildpeak at4w are nice. Nearly 1.5 months with these tires - feels good.

 

Installed 6112/5160, OME leafs, JBA UCA’s and 295/70/17 Mickey Thompson Baja Boss tires!

 

was it hard to install?

 

Took less than 30 minutes, more like 20 minutes. Watch this beforehand: https://youtu.be/1-YBn_2xcvc?si=ZmFIT0TETd-GdugE

 

Thanks man!

 

If you ever find a tint film solution would you mind sharing as I also have that problem

 

Wasn’t today but, OME MT64 suspension. 4007 coils on the fourth clip, add a leaf in the rear. Rides and looks great.