What Have You Done To Your 3rd Gen Today?

Every time I see a GFC or Alu-Cab I start thinking about selling my DB. I like the security aspect of the DB but it really limits bed space.

 

255/85/r16 - falken wildpeak at4w are nice. Nearly 1.5 months with these tires - feels good.

 

Installed 6112/5160, OME leafs, JBA UCA’s and 295/70/17 Mickey Thompson Baja Boss tires!

 

was it hard to install?

 

Took less than 30 minutes, more like 20 minutes. Watch this beforehand: https://youtu.be/1-YBn_2xcvc?si=ZmFIT0TETd-GdugE

 

Thanks man!

 

If you ever find a tint film solution would you mind sharing as I also have that problem

 

Wasn’t today but, OME MT64 suspension. 4007 coils on the fourth clip, add a leaf in the rear. Rides and looks great.

 

I read this, and assume you would tint the screen and not the camera? But then thought maybe you should tint the camera? I don’t know why I’m so interested but I am.

 

I recently did a 3 inch lift (rough country) and upgraded to the Wildpeak AT4W 285/75R16. There is a general increase in just mild vibration but I do get some shaking in the steering wheel at around 50-55 mph. After that it levels out and rides well but it is annoying. Ive had the balance on the tires, alignment and torque on everything rechecked after about 800 miles of use. Alignment, balance and torque were perfect. Will continue to hunt down the vibration and see if I can rein it in. Otherwise I may try a different tire.

 

Added a $25 DropStop from

$25 Drop Stop - The Original Patented Car Seat Gap Filler (As Seen On Shark Tank) - Between Seats Console Organizer, Set of 2 and Slide Free Pad and Light

Amazon to my 3rd gen today to fix the annoying gap that my key fob and phone likes to fall into.

 

Will do! Most of what I've found is either too dark or uses adhesive. I'd like to find static cling because it's easily removed and reused.

Yes tint the screen. It's the display brightness thats too bright, not headlights from other vehicles (though the screen does tend to get washed out from bright headlights, but thats difficult to avoid with a camera).

 

I've been eyeing this shock setup for a while! looks great!

 

I put a piece of electrical tape over the buzzer just to see what it sounded like. I could barely hear it. I took off the tape and I’ll just leave it be.

 

R.I.P. You will be missed

 

wanna sell the preforated one that came with your truck?

 

sure send me a message

 

Check your bushings on all LCA/UCA, and BJ on steering[at tierod end], and LBJ on front and right LCA. How many miles on these components, as far as you know?

 

What is the advantage of this setup, OME MT64 suspension, over the OME Medium 2" lift setup? Specifically is there anything like a variable spring in this set?

 

i took mine off, well i just unplugged it, i was actually used to hearing it when i left my keys in the truck , etc to other noises it let me know i did, so i muffled it with electrical tape.

Now the next step is to removed the gage cluster and remove the chime off the back of it.