Official* New England Buy/Sell Tacoma Marketplace

Any idea if the trans cooler lines are the same across 3rd gen?

 

I believe the 2nd and 3rd gen will be the same. I’d jump on this if I didn’t install an after market a month ago

 

Your sport didn’t come with trans cooler? I think my 17 did, but it might have been a tow package.

 

Finding out is free. If the hardlines don't fit get an AN-6 adapter and some hose and run it that way - that's what I did when I pulled the factory unit to replace with a Hayden, there's posts in my build thread that kinda show what's up.

 

they cut out trans coolers in 2021 i think. no they are not all equipped

 

Didn't some of them switch to using the same cooler and even some of the same lines as a PS cooler instead? Am I imagining that?

 

Cool, cause @MurderedTacoV2 mentioned my lines were corroded to hell and could leak soon.

It did, just that the lines are rusty af right now.

I'll take it, lol.

Mine's an 18, so I still got it.

No clue.

 

I think you are right - my ATF runs through the same radiator as my coolant. I replaced the radiator and had to deal with that. 2020 TRD OR.

 

Well, even the trans cooler equipped models go through the engine radiator first - but yeah, I thought I had read/heard something about that. I was trying to figure out why Mr. Toyota would think PS cooling was more important than trans cooling on a tow package - it's not as though you hear about a lot of PS failure as opposed to cooking the trans when towing with a Taco.

 

10,000 lb winch kit (new)
this is my listing
https://vermont.craigslist.org/pts/d/jeffersonville-lb-winch-new-kit/7793040037.html

 

GONE to a good home.

Free: doesn’t leak. Sounds cool. 3rd Gen. MA pickup. 40k miles.

Website of a new one:
https://www.magnaflow.com/products/...-back-performance-exhaust-system?aces=6612679

 

Any idea if if fits a long bed? If so, I might snag that from you.
Also, how have you been sir?

 

Grab it, even if you have to add a little piece it will work.

 

Yes. It came off a long bed.
Life is always awesome!

 

Great to hear man, great to hear.
I’ll set up a PM to get us started

 

I figured I'd ask here if anyone has a 17" Sport steel spare rim or tire/rim that's collecting dust. I have been using 17" Forerunner rims on skinny tires the past several years and looking to save the best of the 4 current tires, when I replace them. Just need a rim for the "new spare" - don't want to roll the dice with my original OR spare, which is about an 1.5" shorter. Thanks, Bill in Plymouth

 

I'm looking for some side steps or bolt on sliders for a 2nd gen DCSB if there are any leads. Currently have NFABs that are getting crusty.

Just south of Boston.

 

@AllTacosFloat did that donor truck have sliders?

 

https://www.tacomaworld.com/threads...une-3-0-mobtown-sliders-undercover-nj.841898/
This guy has Mobtown bolt ons

 

Sure does. Not off the truck yet and will need a coat of paint and new hardware.

Best pick I have right now. 0 degree, bolt on.
If you’re interested I’ll take them off this weekend. Thinking like $400 as is, or 500 painted with new hardware.