Wheel Well Liners

Doesn’t surprise me. After having delivery of my RC running boards pushed back several times, they only had enough hardware to install one side.

 

I just spoke with RC customer service. They are going to send me a return label. Basically the guy said, that's the only design we have but I'll let the engineering guys know.

For anyone looking to order the RC wheel well liners, check the rear fenders. If you have 2 holes holding the top of your liner to the fender, these may work for you. If you have 3 (like my OR does), they will not work until RC comes out with another design.

 

What a bummer I was going to order these - Hopefully they fix them.
If OR is off road then it won't fit my truck either.

 

I have an OR with only two top holes. I just received mine an I will install this weekend and report back how they fit and install.

 

What build dates do you have that only have 2 holes for the fender flare. Wondering if it's a change implemented at some point this year. Mine is 10/4/2024.

This is what the RC liner looked like installed on mine. Stock liner attached using the 3 screws for the fender flare. Funny, the flare has cutouts for where the 2 screws are for the RC liner but they aren't necessary with the stock liner. I could have drilled the fender but hell with that.

 

Damn I just ordered these ten minutes ago!

 

I definitely give RC credit, they made the return very easy. Hoping they update the design. I'll certainly order them at that point if I haven't found another option by then.

 

Please remember to update how this went as I am very interested in it also.

 

As others have said, on my 4G 4X4 SR5, the RC top 2 holes don't match my existing 3 holes. So I added 2 small holes in the fender flare to accommodate (plus 2 backup nut clips). Also, I found that the entire RC liner is a bit short, requiring me to re-drill 4 new holes in the liner (underneath the mud flaps) on both sides. I was surprised to see how extremely thin the OEM plastic liner was. The RC liner is much thicker, tougher and with probably double the coverage. Overall I'm pleased, but Rough Country needs to do some modifications on the fit, at least for some trim models.