Single clunk from driverside

Whenever I brake hard or I’m pulling into the driveway/turning slow my truck makes this loud clunking sound. I thought it was my swaybar bushing but I replaced them and still hear it. https://youtube.com/shorts/yDomsY89fN8?si=0hETUwfwl-w5-w57

 

Check the upper cab mount bushings/ radiator support bushings

 

Sounds suspension related to me. A bad bushing, BJ, ball joint or CV shaft. Maybe even a missing pin on the brake caliper holding the pads.
Also, check LCA cam bolts; should be 100 ft lbs.

 

I had same exact noise took apart front end to replace ball joints, did my puter tie rods. Was the rad support bushings. I was 1000% convinced was suspension, have a buddy rock your truck back and forth to hear wher the sound is coming from.
Clunk was rad support hitting body mount

 

How hard is that to change? My 2014 has been making a noise like the op’s truck for years.

 

Not very hard to change using prybar, maybe block of wood. And a ratchet and wrench I have a bumper cut, and fender trim so have no fender liners. I went with energy suspension polyurethane. Stopped the front noise still need the 4 lower cab mount bushings, those will need to unbolt cab and slightly jack up off of frame. Pic is bottom view looking up.

 

Thanks for the info!

 

Nevermind maybe this was the clunking noise, only kidding barely saw this today while changing oil

 

Dude!

 

Tighten the through bolt on the upper control arm

 

changed mine on the street in the rain.