New England Mod & Meetup Thread:

But I don’t own any 3/4” anything. That’s big boy stuff.

 

And 250ft-lbs isn’t considered big boy stuff????

 

Ok, you have a point. I’ll get by with the one I have. 250 is the max but it’ll do.

I’m cheap and more importantly have no space to get into that size too.

 

Well the cv axle nut is 173 so you need a 250 ft lb torque wench. They usually max out at 150 or 250 for 1/2 drive

 

I have a couple of 250# 1/2" torque wrenches..
And, an FYI, if yall need anything BIG. I do have a GOOD calibrated 3/4" torque wrench. 200-600. And sockets of course. Not sure where they'd come into play on the Tacoma... but, hey..

 

Me neither. The largest torque wrench I have tops out at 150 lbs. Need a 250 one for the axle nuts (173 ft lbs) on my truck.

 

No. I worked at a place that repaired industrial gearboxes. There was one thing that the torque was about 1,500. We had a 4 or 5 foot long torque wrench that took three guys to operate.

 

@jpereira2 ,@BlackWagon Happy birthday guys!!!


Hope it’s a great day for y’all!!

 

Thank you! Other than getting the wife lug nuts replaced todayall I'm doing is making some burgers tonight lol

 

Happy Birthday, @jpereira2

 

Happy Birthday @jpereira2 !

 

FUCK YA FRIDAY

 

Happy birthday! @jpereira2 @BlackWagon

 

Happy Birthday @jpereira2

 

Idk about yall but i usually just use a 1/2 impact for axle nuts - but i do carry my snapon 250 ft lb torque wrench around in the truck. Crazy to think i got it for 170 bucks now they are 400+. Think the most ive done is 230 ft lbs and that was a PAIN to get to that spec

 

Yep, big milwaukee go ugga dugga

 

Happy belated @jpereira2 !

 

Mini mod day with @crashngiggles and @super_white . Was a good busy day! Not a lot of pics Believe we made it thru the day with minor flesh wounds and no broken bolts.
All in all a great day

 

@crashngiggles , found it.

 

Who needs that? Taco lean?