3rd Gen Magnetic Gray Thread

I fit 31.5 on stock no problem. Just ordered 5100s and plan on leveling. Will that be enough to get 33s without rubbing or just stick with 32s?

 

Pollen, yes. Dirt and dust, not really. Water spots, yes. Mud and clay, hell yes lol

 

I believe it will be dependent on wheel offset and alignment. I had mild running when turning in reverse on stock suspension when I went to 31.5's but also went to
late model OEM 4Runner Wheels which moved the wheels out a little(more positive offset).

 

That makes sense. I'm still running stock steel wheels. Don't like them, but haven't found anything I have to have either lol

 

My rig freshly washed. It’s a 2021, and I’ve had it since new.

 

.

 

80 degrees today

 

dd + work + tow

 

Just wanted to update.

I went ahead and lifted 2" front and rear and moved up to 285/75/16 on the stock steel wheels. Had to add a spacer. When turned fully the wheel was rubbing the front of the upper control arm. Went with a 1.25" spacer and I now have nearly an inch of clearance on the upper and still a ton of room everywhere else. Could fit 35s I think with new uppers.

 

Glad you got it worked out.

 

what size tires are you running and lift?

 

Now that is some mud! Awesome pic

 

Wow, surely you didn't drive out of that without assistance...

 

https://youtube.com/shorts/FN05IsdmCaM?si=i03yd2MuW6dkMuOH

 

Are those the SCS F5 wheels in Gunmetal? Been having my eyes on those or the 4Runner Pro Wheels in Gunmetal. Looks good.

 

@Saturnine I take it that's a no

 

Looks like a different part of trail than the pic.

 

It's possible. But the result was the same. Didn't get stuck that trip.