Fan only working on High

Got into my 2013 this morning and the fan does not work on Low, Med or Med/High. But it does work on High...

Did some searching and found this video!: https://www.youtube.com/watch?v=PwWF9jo2idM

I assume this is the proper fix? Is there anything else I need to do or check first before buying this part?

Thanks!

 

Yes: the blower resister is likely toast.

 

Everything you need to know about that issue is in the link below.

https://www.tacomaworld.com/threads/2nd-gen-information-diagnostics.784008/#post-28042158

 

Thanks, also found this funny guy's full tutorial: https://www.youtube.com/watch?v=vYLpq3yjDu0

 

Thank you!

 

I know you can get the two part numbers cheaper online, but just for anyone else who's looking, I was told it's $165 total for the two parts at my local Toyota dealership.

 

There is a "new" style one you'll want WITH the new style pigtail as well. The square one in the video above is the new style, the flat one is the old. DO NOT get the old style one or you will be doing this again at some point! As far as where to get them, in Canada not sure. I just went to the dealer as I was afraid of cheap knock offs on Amazon...