Molle Panel for rear wall with sub

I have the JBL sub behind the rear seat on the driver side. Saw the Molle panel on the Toyota accessory list but it looks like it's just for the entire rear wall. Does anyone know of a vendor that makes a Molle panel to fit the rear wall passenger side when you have the sub?

Also, does anyone know what the actual clearance is behind the seats? I'm thinking it might be somewhat limited space behind the seat but I could at least attach a few items that are currently just stuff under the seats. Things like my axe, emergency kit, etc. Maybe I'm being overly optimistic....

 

You sure that molle panel is not for the xrtacabs? There is almost zero room behind the rear seats. On the sub side there is none and on the passenger side there is a small cutout but get flush a few inches up. This rifle will not fit.

 

Thanks. I wasn't sure if the panel i saw was just for the extracab or double cab without JBL. Looks like you are right. If that rifle can't fit, no way a panel and attachments would. You just saved me from trial, error, and return. I appreciate it.

 

Well, you could always remove the seat, which is what I'm leaning toward these days. Molle panel will fit great then! ;-)

 

Lol. Wife and kids would not approve...

 

Well, I get that. For me, just another reward for being an empty nester...for now anyway. College graduation is in May!

 

There's a ton of room if you remove the plastic panels & you will never know with the seat in the upright position.
All sorts of anchor points for a panel once the plastics are off.
Panels come-off in lately less than a minute if you have done it before...
I was scared at first, sooooo simple....

 

Did you notice an increase in road noise after removing the plastic panels?

 

I didn’t go drive around, I removed my panels to sound deaden the back wall…
You have a minimum of 6 inches if you remove the panels, Taco Tunes is ready to release a sub enclosure for behind the seat…