Light metallic rattle front driver side

im stumped at this point & am probably just overlooking the issue.. 23 tacoma sport 4x4, bilstein 5100s all around with ome 2888 springs & diff drop kit. (less than 1k miles on lift install)
front driver side wheel well has started making a rattling noise over bumps almost sheet metal like. i feel like i checked everything but my brain is fried at this point.
video clip below: https://youtube.com/shorts/sUK8DmdcjPc?si=V4IXow7iNphPJNLN

 

Shouldn't be but just a stab, have you checked the catalytic converter heat shield?

 

Can't really hear anything over your revving the engine... (maybe it's tough to capture these sounds)

But try this post (see if that sound is something like yours)
https://www.tacomaworld.com/threads/weird-noise-front-drivers-side-after-suspension-swap.847119/
(it ended up being his disc brake shield)

 

what did the dealer say?

 

i did actually :/

 

i’ll give this a try next, i read that post but haven’t done it myself yet

 

I had a wierd noise on mine that I could not track down. Saw somewhere deep in the 3rd Gen archives to check the body mounts. Both my front cab mounts, (where the Cab Mount Chop would be done), were just a little loose. 1/4 to 1/2 turn on each and the rattle went away. Been good for a year or so now.

 

Could be the hood scoop. Swap for a non-scoop hood, adds HP, improves mileage and top speed.

 

funny story … rear driver side shock the lower mounting nut backed itself off. bolt was still there luckily

 

The sound is from 0:05 to 0:12. My truck def doesn't make that sound

 

Nice, glad you found it and that it was still there.