What Have You Done To Your 3rd Gen Today?

I agree with that, enjoy your new ride! Not cutting you down. You are posting on a Tacoma forum, so opinions will be biased. Me personally, I don't think you "traded up."

 

Where did you end up running the wires to tie into the battery? Below the steering wheel and then out through the firewall, I would imagine, but I'm curious how you did it to make it clean. And where are you thinking of tying a switch into the system?

 

running from the police no doubt

 

Swapped King for Dobinsons.

 

I bought my Taco used, the previous owner had wired (poorly) some additional lights. There is a grommet through the firewall left of the steering wheel and clutch pedal where several wires pass through. I added a longer chunk of wire from the 3TPAM USB module to a fuse and tapped the main battery clamp.

I'd like to add a switch on the 3TPAM somewhere that will allow me to control the power to that module. It would be even better with a 3 position switch for always on, off, and ignition power, but then I need a source for switched ignition power in there as well. I may add a digital voltmeter that only displays when I push a button. This weekend I had the idea to add the voltmeter to the overhead map lights - unfortunately reading the voltage there did not match the reading I got at the battery.

 

Yeah, used some engine assembly grease to ease the installation and some WD40 to clean it up. Stud was the same size. Got it from Oriellys for a few bucks.

 

My first wash, clay bar, and wax since I bought her brand new last year. I absolutely hate doing this. But I should probably do it twice a year.

 

Chemical Guys Clay Bar kit works nice, but the clay bar lube spray smells like peppermint!~

 

eh bra aloha
at least you have tropical weather to do it when evaa
you lucky and protect that great ride
I have only 6 month window
a hui hou

 

A switch on the 3TPAM would be cool, and the idea of a voltmeter is also a nice touch. I tapped the DRLs for my ignition on for a switch panel that links my other electrical accessories. I could tie into that, but it seems like a waste of a switch spot for something that, 90% of the time, I would prefer to have on.

An OEM switch like the tailgate light switch is what comes to mind for the switch you're thinking of adding (if it was not on the actual 3TPAM). If I remember correctly, the three switch levels should be ON, On Door Open, and OFF. The anytime camera has the same switch style; there might be only two. That could be a terrific way to add a switch if you've got the space to add one. There has to be a switch style similar to either of those that could be used to regulate the power draw and what not

 

i did a little brainstorming about this.

I came up with a three way 3" pipe and an adjustable 3" blast gate I can open up and dissipate some of the heat should do the trick.





I will get a piece of cardboard and trace out the outline for the abs insert in the topper side window where the 3" flange will pipe heat into the topper. Then trace it on the abs plastic and cut it out. Then I'll trace the flange on the abs and cut out the hole and drill the screw holes to mount the flange to the abs and bolt it down.







Ordered everything today. Just need to order my tire step, my 600 ah LIFE P04 battery, my 30A LIFE P04 charger. Then I need to order a solar panel and the cable/connectors. I also want to run a dedicated line from the truck battery to the bed. That way I have three ways to charge the Life P04 battery. Dedicated charger at home, from the truck battery while driving around or with solar.

A fridge in the bed and a plugin for my laptop and I'll be set.

 

The above post by @tmcarpen was the seed of the idea. I probably won't use an OEM switch position, rather I would 3D print a housing that would mount to the 3TPAM which would contain both the switch and the voltmeter. The voltmeter shouldn't draw much, and if I'm pulling power while the truck is off, I should probably be monitoring the battery voltage anyway.

 

Nah, some hung over sailor stole his jacket (because the sailor gave his jacket, the night before, to a beautiful woman) He just saw the end result! Go Navy! Beat Army!

 

Nice thing about Narcan is that if you administer it to someone who is NOT on Opioids it doesn't do anything. In an over simplified nutshell - All it does is chemically release the opioid from adhering to the cells that make it active so it can get filtered out. Sometimes a patient will need Narcan and then a second dose 5 to 10 minutes later if they have a lot of drugs in their system.

https://www.cdc.gov/overdose-preven..._FamilyandCaregivers_HowandWhen_4_11_2024.pdf
https://youtu.be/1f54eFFU82g?si=N9LLT0gSvLCCwKtU

 

I’ve heard things like, I had to use 2, or 4. But yeah it’s pretty incredible. Funny thing is you can die from detoxing off alcohol but not heroin.

 

Another good FB marketplace score over the weekend. Used C 4 bumper, winch and lights will have to wait

 

Yesterday was a coolant change (drain and fill). This morning was Meso topographic door handle covers and AJT topographic glovebox inlays from yota expedition. Also did black Meso AC vent trim rings and trim rings for the console, start button and 4wd button last week.

 

Did a fender trim to stop the rubbing on 34s…now I’m debating if I want to do the hamma hangurs myself…been watching videos and reading about it…seems complicating and time consuming

 

I'd trust myself before letting someone else air hammer the rivets out of the frame.

 

Grind the heads off and they knock right out!