Fog lights?

Now I'm back to looking for a good harness with relay...

 

Thoughts?

https://www.morimotohid.com/Morimot...p12ThFlSnJNnywju2KjfCX3_-L6pQmJRoCuj0QAvD_BwE

 

Your chosen lights do not have directly compatible connectors with this harness, i.e. not plug and play. I would think the manufacturer would have a harness that would be. Talk to them, I’m sure they would help.

 

We don’t have a harness to add factory fitment fog lights to a no-fog truck, sadly. Do you want independent control of them? If so, that harness you posted would suffice, but the output connector type is not H11, so it would need to be modified for those.

If you don’t want/need independent switching, you can split off the stock low beam circuit directly and they’ll just be on when low beams are on. However, it may require a relay setup if the load is too much. I can’t say I’ve done this specific setup so I’m not sure if it’s too much of a load or not. Also, the low beams may not shut off when you turn on the high beams, which is when the fogs should shut off so you can better see in the distance too

 

Independent.
It looks like a morimoto fogs come with h11 but they are not connected, wouldn't a female 2pin deutsch connector work?
https://www.morimotohid.com/deutsch-connectors-DEUTSCH?quantity=1

 

do they come adjusted close to the oems or did you have to adjust them?

 

Have to adjust a bit... screwdriver and masking tape. I have faith in u!

 

dang....they say plug and play

 

And when I'm at work, I act like I give a shit about the retarded company I work for... the world is not as it seems.

 

Have you by any chance looked at the rough country foglight kit. it has everything to put fogs in a Sr. Not sure if you wanted white lights though, but you could add the yellow fil over the lens.https://www.roughcountry.com/product/tacoma-led-fog-light-kit-71095 And as far as I can tell the wiring harness would work, the only thing in the kit that has a issue is the switch.... it needs to be modded to fit, according to the reviews.

 

https://www.morimotohid.com/morimoto-h9-hd-relay-harness?quantity=1

 

this one wouldnt work? https://www.morimotohid.com/morimoto-h9-hd-relay-harness?quantity=1

 

I'm not sure, I don't see a way to wire in a switch.

 

yes you can also convert the fogs to a 2 pin Deutsch and they would then plug right up!

 

This one doesn’t have a switch, so you’d have to cut off the input and wire in a switch to control it.

 

I'm a cheap skate and with my 17 SR I didn't wanna buy a new harness from Toyota to install the Tacoma fog lights I picked up here on Taco World so I went to the junk yard and snagged the wiring from a Camry with the connections for $10 and used an aftermarket switch. The new harness was over $100 at the time. I got the LX chrome surrounds and new fog light take offs for $35.

 

That's what I'm going to do.
Now to see if the length of the harness works.

 

Sounds like you could sell alot more foglights for sr tacomas if morimoto made a harness that was plug and play. I have been hunting for a harness as well, I like the evo+ fogs. But it has been a total hassle trying to find a harness to work, just like the OP of this thread.

 

dont forget you need to source out the bezels, rock auto has them.... good luck to you.

 

Agreed, it has been a lot of searching.