Ideal load range for snow wheeling

Yes, they are LR E. as far as comfort my truck rides well but that in part is due to having really soft springs. I also don't run more than 30 psi ever lol

dunno if the quality will hold up but you can see E right on the sidewall

 

That's my main thing really, is the airing down aspect. If a E load will still have the ability to bulge out, I'm all for them. I didn't buy a small pickup to want a cooshy ride lol. Even though they aren't big, they're still a truck. Lol.
I know alot of people complain about E loads being stiff and uncomfortable. But hey, I have a commuter car for a reason. Thanks for the info, friend. I got some thinking to do.

 

I've always ran C, usually keep it at 8 psi in snow. Deep backwoods snow. E is way too stiff for these trucks. Even with C I run 29psi on the street. My tires wear evenly.

Pic is near the spillway at the rubicon. Ko2 at 10 psi pulling a jeep out.

I've lost a bead at 3 psi but it was a 10" wheel with km3. Starting fluid and a lighter, air up with co2 and you are good to go