Abs/Vsc activating in slight turn at any speed

My 2007 Tacoma 4x4 traction control and or vsc light comes on in slight right turn going down the road. All I have is a level kit and 33” tires

 

Did you do the VSC Zero Point relearn after the level kit and tires?

If not then do that before anything else.

https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

 

I’ve heard about that, I’ll definitely try that first. Thanks!

 

Interesting, didn't know 2007 has VSC. I thought it was introduced in 2009. Anyway, make sure the steering wheel is centered when going straight, as the steering angle sensor is an input to the VSC system.

 

It was optional on 03 or 04-08, not very common to see one with it in the wild though.

Became standard in 09

 

I would recommend reading the process a couple of times before you attempt it. Once you understand it, it's not too bad to perform. If it doesn't seem to take care of your problem, do it again.
I had this exact same problem after replacing my LCA bushings a few years back. After I got it aligned, I performed this and it hasn't happened since.

 

my 08 does not have stability control. That is a good thing.

I need to figure out how to delete the ABS. It is garbage.

 

^It's a good thing if you're trying to learn rally driving!

You tried unplugging one of the front wheel speed sensors?