4x4 Conversion Oversight...missing parts

On my 1 mile test drive, got some horrible noises & almost no braking. Crept back into the driveway, bled front brakes, and realized that the hubs were moving within the spindles as I turned.

Found this diagram and realized that, duh, there's really nothing keeping the hub pressed in against the axles. I'm missing the highlighted. Anyone know part #s or any other names they go by for aftermarket?



Update, I found the 'bearing spacer' (I think), but I cannot find the 'w/o ABS spacer': 43524-35010. I hate how they only put the first set of digits...


Update again, I think the other spacer may be one I pulled out of the 2WD assembly: 90560-52001

 

The "lock cap" is a failsafe to keep the axle nut from backing off. You should be fine driving without it as long as the nut is properly torqued--going without it sacrifices safety but it shouldn't affect functionality.

Part number I found is 43525-35010. I got there by searching Google for "43525B Toyota".

 

If anyone has a pair of the 43524-35010 (from an ADD model), I'd be interested in buying since I just paid $63 for an OEM pair from Toyota...got about a week before they come in

 

SPACER, FRONT WHEEL INNER BEARING, RH/LH
Part number: 4352435010

You can use the abs spacer if its easier to get.


https://partsouq.com/en/catalog/genuine/unit?c=TOYOTA00&ssd=$*KwH2wtPc8_Ly9q2SsZDF3q66mp2D8v3w8ePM_7exgpaKjoyPyt3xm7WxtYSSi5rcwcv2_5aCh4qPgeP9z7_ntuH-55jisbHs5v_wvrqwq6Td6K2nrKbh_vfu4vv66-b_4Pf39fHisbHmquf44fD28vakpK25u7SqoIW54v7wrf7l4PXz8fb2rbGj5Oert-b_4uLN0t2FiODv5Oevo7-pr-aTmI318vKMsNDdlIKJgobn7uC_5ezm_-Ktsamu7L2x6a2h4Pnk_L8AAAAAMqCbTg==$&vid=0&cid=2&uid=344774&q=

 

You can use the abs tone ring if you can't find the other spacers.

 

Was wondering about that - thanks for the intel