SPC UCA (V1) - $150 shipped

SPC UCA for second gen. V1 welded version. Got tired of replacing ball joints but is a great way to add caster on lifted vehicle. I probably wasn’t great at keeping them greased

note: one side of the threaded ABS holder bolt snapped off. Could easily be drilled and retapped I just used zip
Ties.

recommend replacing both ball joints. Driver side is toast. New ball joints are about $150 a set.

Bushings are good maybe 10k on those and all washers included

$150 shipped plus PayPal fees

 

bump

 

@BostonBaja

 

Do you know if the newer style control arm ball joints fit on these? I got in a wreck and bent the arm but the ball joint seems fine. I was wondering if I could swap it onto this one

 

Spc 35101 fits for sure. I have these same welded arms.

 

@happyabortion AFAIK the ball joints are backwards compatible. You can always double check with SPC but these originally came with the non-lubed balls and I swapped out 2 different sets of greaseable ones. Looks like there is an even newer version maybe these will last longer.