What Have You Done To Your 3rd Gen Today?

The question, dear Grasshopper, is -why- do humans exist.

The answer, of course, is…

 

So I just went with the icon and I’m on stage 3. I’m hoping it doesn’t sag much because if it does I will have to look into others. I did the 2” bilstein level first pic is the day I did it. Second pic is about a month later. Tad settle but nothing crazy so far. I have a box build out in the rear that’s about 200-300lbs plus my mid rise camper so roughly 500lbs full time not including my work gear. Hope this helps

 

Sums uh britches!

 

@Willy Lump Lump , what bumper is this?

 

Been sunny but barely gets above freezing lately. Just had to get outside for awhile.

 

Greenlane off-road stump bumper w/wings. Sounds like a feminine product.

 

totally cool

 

Greenlane gear sounds like the real deal. If I go aftermarket and some rich relative croaks and leaves me some scratch, it’s Greenlane time.

 

put a used tire from ebay on the spare since i went up in height from the oems
hope to never have to use it.....never had a flat on the oems

 

Thanks!

 

damn tootin.....i take one bite of my hamburger and throw the rest away

 

yep ....everybody needs a blood transfusion every month or they wont live to 20 years old

 

Added some tube steps…

Not finished yet since despite my best efforts to get the LAST bolt in straight, I ended up cross threading the last hole. Tried to get it in straight afterward and slowly work the bolt in to correct it but it got tough to keep it going so I backed off. Only made it about halfway in before stopping, so I’m gonna research a bit on how to best remedy.

Figure it should be easy enough to tap/rethread if necessary, but I’d rather confirm with those more knowledgeable before doing more damage.

ETA: Tapped the bolt hole, ran the bolt through the die to clean it up a bit, and boom- she threaded right in. I’ve stripped a few bolts over the years but never needed to tap so I had to buy a die/tap set this morning- pretty pumped it went as smoothly as it did. It’s almost as if the tools were designed to do the job...

 

yes but many pass away too early from stress about not changing their "SYNTHETIC" oil at 3000 miles

 

Used it to pick up the new washing machine and then drove it to Barrett Jackson Snobsdale. Porsche's, Moostangs and hot rods!

 

If Shelby would remove that ridiculous carbon rear wing, goofy stickers and emblems they'd have a really nice product. Basically a supercharged mustang with brembos, borla catback, lowered suspension and nice wheels.

 

Your nurse forgot to give you the medication for about 3 weeks ... obviously.

 

New Steel Bumper from Cbi

 

I love this setup - but I see you have your rear cargo boxes set so they open from the inside - wouldn't they be easier to access if they opened from the outside (eg. latches facing the outside of the truck)?

 

What wheels you runnin?