What Have You Done To Your 4th Gen Today?

are those 703 hub centric or did it come with a plastic ring ? +35 offset?

 

Got my ditch lights installed. First time using a switch controller vs wiring up relays, fuses, switches, etc.
Much easier setup but still a bit of wiring.


Also upgraded the door speakers and dash speakers. Much better sound with the added sonic beats amp.
Debating adding a roof rack, not sure I will use it much. Maybe mount lights on it, but actual usefulness, not sure.

 

I have the Hybrid and I don’t believe the Hybrid has an Intake Resinator. Not sure if the non-hybrid has one. From doing some reading there might be a resinator in the exhaust system but for the Trailhunter

 

New mud flaps. I like the Husky ones.

 

yeah I started researching it and it seems all of them just have a short pipe that connects to the intake resonator. There’s only one I’ve found that removes it and connects directly to the turbo inlet

 

That’s what I use.

 

I added heritage stripes to the front, Bonobo Recovery Points to the front, Black Exhaust tip, Bakflip MX4 bed cover and Lasfit floor mats in front and back over the weekend. The Storm Trooper is dirty as we had snow and the roads have been a mess with salt and all.

 

What is the size difference between the Husky and OEM flaps?

 

They are much larger. You really can’t compare them.

Here are some pics I took a few months ago.

https://www.tacomaworld.com/threads...ur-4th-gen-today.834072/page-49#post-30181063

Husky measurements at

https://www.tacomaworld.com/threads/for-those-wondering-about-weathertech-mud-guards.845343/#post-30227343

 

Here you go

 

Nice, would you mind where did bought it…I want it too.

 

Today was a bit warmer outside. I installed my slider look Chamber running board . Easy install bolt on, no drilling required.

 

If you’re looking for the Reverse back up light kit just call the guys at Baja design. They put together the reverse light harness with crossover power wire and the off-road light.. It’s super bright.

You can email one of these two associates Bill or Brahian from Baja design they’re on the “ tacoma world” forms or call them directly.
Brahian Herrera | Forum Sales & Support
Email:brahianh@bajadesigns.com | Phone: (760) 560-2252

 

I finished installing an ARB modular drawer storage system. One of the drawer systems has a sliding top that I will attach the Engle cooler to that slides out over the base drawer. Every trip that I’ve taken off road. I’ve broken my plastic storage containers, so no more individual cases to strap down.

I called ARB directly and they do not make a kit for the 2024 Toyota Tacoma. I used a universal drawer system with a 2023 Toyota Tacoma bed kit and was able to make it work. I have extra space because I have a 6 foot bed, which I will utilize storage for the Devos telescoping light or an air compressor 4 gallon reservoir tank.

Noel, parts manager at Rancho Santa Margarita Toyota has been Uber helpful in ordering parts.
Parts Manager- Noel Oseguera
Santa Margarita Toyota
22722 Avenida Empresa
RSM, CA 92688
(P): (949)766-2154
(F): (949)635-6734

 

Spent a couple hours this afternoon installing my Miller Cat skid plate and Bonobo front recovery points. Easy install and very beefy on both accounts.

https://millercat.com/products/toyota-tacoma-g4-24l-mcx-skid-plate?
https://bonoboproducts.com/products...rlQ77CVZg8ARXII5lQfJuBas-erL-v9x6siJ2A4sioCYM

variant=50389676228917

 

First two mods on the '25...

Center console molle panel & mud flaps:

$30 aHei Front and Rear Mud Flaps Splash Guards 4PCS No Drilling Heavy Duty Fender Mudguards Kit Compatible with Toyota Tacoma 2024 Accessories

https://www.amazon.com/dp/B0DH2GZG5T?ref=ppx_yo2ov_dt_b_fed_asin_title

$19 Trumgeta Center Console MOLLE Panel Fit for 2024 2025 Toyota Tacoma Interior Armrest Organizer Transparent Smoke Gray

https://www.amazon.com/dp/B0DNDPXYMG?ref=ppx_yo2ov_dt_b_fed_asin_title

 

2025 Taco Offroad LB
Wecott lift
703 Methods in Gloss Titanium
315/70 17 KO3s

I really love my 4th gen but I must confess my 3rd gen is still the Queen

 

Love that raised white lettering!

 

Installed the OEM trail hunter grill on mines. Way more tedious and time consuming than installing grills on the last gen.

 

By FAR, the best looking truck onhere.