What Have You Done To Your 3rd Gen Today?

OK - so ECT switch is simple momentary, and ECU controls/changes the ECT status with each ‘contact’ made.

Thanks for the details!

 

Thanks! And Yes, the Shaka is new, good eye.

 

Can you give comparison of the 2 covers? I have backflip and am wondering why you swapped?

 

Mostly because I wanted a tonneau that is still fully functional with a bed rack. I plan on getting the upTOP rack that works with the retrax.

And partly because I have to move a some stuff regularly for my wife’s business that requires me to flip the bakflip up and I don’t like the back window being covered.

As far as comparison the bakflip is great, I just thought this would work better for me.

 

CMR for 35s!

 

https://www.tacomaworld.com/threads...3rd-gen-today.399305/page-14466#post-30385458

I left out pics since I just posted in this thread a couple weeks ago. Thanks for the reminder that I need to get some better pics while it's clean and the sun is out!

 

Beauty. Got the same waiting to be installed, hopefully next week. Going 34's.. for now.

 

I assumed nothing. Hence the if.

 

Post Windrock deep clean.

 

It’s an easy diy, with a couple jack stands and a jack! Videos on YouTube! The OEM 1/2 “Pro” blocks are about $10 each, and your factory ubolts will work for a 1/2” inch. I did the Pro suspension 1/2” rear block and added 1/4 spacer on top the front.

 

Thanks!

I've seen video on this...need jacks to hold up the axle/differential to insert in between leafs.

More questions to ask the dealership...right now, the shop is super busy.

I just want to get this all in one swoop to include alignment...so I don't have to piece-meal this project.

Dealership should not have to mess with the TSS since it is a Shock Lift Kit only but I will confirm.

Like I said, I'm in no hurry to get this done.

 

dont Let them calibrate the tss if they tell you it needs it. That’s bullshit. One of my 4 grilled needed to be calibrated, I drove a couple hundred miles and it calibrated its self just fine.

 

The block is the easiest part. I also added a “heritage” grille before the lift and neither time did it affect my radar sensor, it reset after a few miles with the new grille, I even covered the sensor and didn’t use a high dollar “garnish”. The only issue was the dragon once.

 

That seat is clean. What is it?

 

I will gladly let them know:

 

I bought the Garnish for like $45 when I bought the grill from EmpyreOffRoad--it is starting to discolor from sunlight. (Not in this photo)



Still looks good when washed.

 

RCI engine skid installed

 

Nice Skid!

DANG!!!

Those are BEEFY tires!!!

I'm looking to put 275/70R17s on my Sporty.

 

I remember seeing a post about the spare rubbing on the frame when stored and a few folks put a piece of rubber over the spare then cranked it back up to store it. This is what I did.